ZyXEL P-2812HNU-F1 User Guide - Page 106
Broadband Add/Edit: Routing- PPPoA ADSL continued
View all ZyXEL P-2812HNU-F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Chapter 5 Broadband Table 10 Broadband Add/Edit: Routing- PPPoA (ADSL) (continued) LABEL DESCRIPTION PPP User Name Enter the user name exactly as your ISP assigned. If assigned a name in the form user@domain where domain identifies a service name, then enter both components exactly as given. PPP Password Enter the password associated with the user name above. Authentication Mode The Device supports PAP (Password Authentication Protocol) and CHAP (Challenge Handshake Authentication Protocol). CHAP is more secure than PAP; however, PAP is readily available on more platforms. Use the drop-down list box to select an authentication protocol for outgoing calls. Options are: AUTO: Your Device accepts either CHAP or PAP when requested by this remote node. CHAP: Your Device accepts CHAP only. PAP: Your Device accepts PAP only. MS-CHAP: Your Device accepts MSCHAP only. MS-CHAP is the Microsoft version of the CHAP. Use Static IP Address A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not fixed; the ISP assigns you a different one each time you connect to the Internet. Select this if you want to get a dynamic IP address from the ISP. IP Address Enter the static IP address provided by your ISP. Routing Feature NAT Enable Select this option to activate NAT on this connection. IGMP Proxy Enable Internet Group Multicast Protocol (IGMP) is a network-layer protocol used to establish membership in a Multicast group - it is not used to carry user data. Apply as Default Gateway DNS Server Obtain DNS info Automatically Use the following Static DNS IP Address Primary DNS Server Secondary DNS Server IPv6 Address Obtain IPv6 Address Automatically Enable Prefix Delegation Select this option to have the Device act as an IGMP proxy on this connection. This allows the Device to get subscribing information and maintain a joined member list for each multicast group. It can reduce multicast traffic significantly. Select this option to have the Device use the WAN interface of this connection as the system default gateway. The section is not available when you select Bridge in the WAN Service Type field. Select this to have the Device get the DNS server addresses from the ISP automatically. Select this to have the Device use the DNS server addresses you configure manually. Enter the first DNS server address assigned by the ISP. Enter the second DNS server address assigned by the ISP. This section is not available when you select Disable in the IPv6/IPv4 DualStack field. Select this option if you want to have the Device use the IPv6 prefix from the connected router's Router Advertisement (RA) to generate an IPv6 address. Select this to enable Prefix Delegation. This enables an IPv6 router to use the IPv6 prefix (network address) received from the ISP (or a connected uplink router) for its LAN. 106 P-2812HNU(L)-Fx Series User's Guide