ZyXEL P-2812HNU-F1 User Guide - Page 110
Broadband Add/Edit: Routing- IPoE ADSL continued
View all ZyXEL P-2812HNU-F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Chapter 5 Broadband Table 11 Broadband Add/Edit: Routing- IPoE (ADSL) (continued) LABEL DESCRIPTION Obtain an IP Address Automatically A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not fixed; the ISP assigns you a different one each time you connect to the Internet. Select this if you have a dynamic IP address. Enable DHCP Option 60 Select this to identify the vendor and functionality of the Device in DHCP requests that the Device sends to a DHCP server when getting a WAN IP address. Vendor Class Identifier Enter the Vendor Class Identifier (Option 60), such as the type of the hardware or firmware. Static IP Address Select this option If the ISP assigned a fixed IP address. IP Address Enter the static IP address provided by your ISP. Subnet Mask Enter the subnet mask provided by your ISP. Gateway IP Address Enter the gateway IP address provided by your ISP. Routing Feature NAT Enable Select this option to activate NAT on this connection. IGMP Proxy Enable Internet Group Multicast Protocol (IGMP) is a network-layer protocol used to establish membership in a Multicast group - it is not used to carry user data. Select this option to have the Device act as an IGMP proxy on this connection. This allows the Device to get subscribing information and maintain a joined member list for each multicast group. It can reduce multicast traffic significantly. Apply as Default Gateway Select this option to have the Device use the WAN interface of this connection as the system default gateway. DNS Server This is available only when you select Apply as Default Gateway in the Routing Feature field. Obtain DNS info Automatically Select this to have the Device get the DNS server addresses from the ISP automatically. Use the following Static DNS IP Address Select this to have the Device use the DNS server addresses you configure manually. Primary DNS Server Enter the first DNS server address assigned by the ISP. Secondary DNS Server Enter the second DNS server address assigned by the ISP. IPv6 Address This section is not available when you select Disable in the IPv6/IPv4 DualStack field. Obtain IPv6 Address Automatically Select this option if you want to have the Device use the IPv6 prefix from the connected router's Router Advertisement (RA) to generate an IPv6 address. Enable Prefix Delegation Select this to enable Prefix Delegation. This enables an IPv6 router to use the IPv6 prefix (network address) received from the ISP (or a connected uplink router) for its LAN. Static IPv6 Address Select this option if you have a fixed IPv6 address assigned by your ISP. IPv6 Address Enter the static IPv6 address provided by your ISP using colon (:) hexadecimal notation. Prefix length Enter the bit number of the IPv6 subnet mask provided by your ISP. IPv6 Default Gateway Enter the IPv6 address of the default outgoing gateway using a colon (:) hexadecimal notation. 110 P-2812HNU(L)-Fx Series User's Guide