ZyXEL P-2812HNU-F1 User Guide - Page 26
The RESET Button - password
View all ZyXEL P-2812HNU-F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Chapter 1 Introduction Table 1 LED Descriptions (continued) LED COLOR STATUS DESCRIPTION WLAN/WPS Green On The wireless network is activated and is operating in IEEE 802.11 "b", "g" or "n" mode. Blinking The Device is communicating with other wireless clients. Orange On The WPS is configured. Blinking The Device is setting up a WPS connection. Off The wireless network is not activated. Refer to the Quick Start Guide for information on hardware connections. 1.7 The RESET Button If you forget your password or cannot access the web configurator, you will need to use the RESET button at the back of the device to reload the factory-default configuration file. This means that you will lose all configurations that you had previously and the passwords will be reset to the defaults. 1 Make sure the POWER LED is on (not blinking). 2 To set the device back to the factory default settings, press the RESET button for 5 seconds or until the POWER LED begins to blink and then release it. When the POWER LED begins to blink, the defaults have been restored and the device restarts. 26 P-2812HNU(L)-Fx Series User's Guide