ZyXEL P-2812HNU-F1 User Guide - Page 282
Product Specifications, P-2812HNUL-Fx Series User's Guide, Note: Only upload firmware
View all ZyXEL P-2812HNU-F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 282 highlights
Chapter 28 Product Specifications Firmware Specifications Table 90 Firmware Specifications Default IP Address http://192.168.1.1 Default Subnet Mask Default User Name 255.255.255.0 (24 bits) admin Default Password DHCP Server IP Pool 1234 Starting Address: http://192.168.1.33 Size: 32 Static DHCP Addresses Static Routes 128 Max 16 Device Management Wireless Functionality (wireless devices only) Firmware Upgrade Use the web configurator to easily configure the rich range of features on the Device. Allow IEEE 802.11n, IEEE 802.11b and/or IEEE 802.11g wireless clients to connect to the Device wirelessly. Enable wireless security (WEP, WPA(2), WPA(2)-PSK) and/or MAC filtering to protect your wireless network. Download new firmware (when available) from the ZyXEL web site and use the web configurator, an HTTP/FTP/SCP/SFTP tool to put it on the Device. Configuration Backup & Restoration Network Address Translation (NAT) Port Forwarding DHCP (Dynamic Host Configuration Protocol) Dynamic DNS Support IP Multicast Time and Date Logs Universal Plug and Play (UPnP) Firewall MAC Address Filtering Note: Only upload firmware for your specific model! Make a copy of the Device's configuration. You can put it back on the Device later if you decide to revert back to an earlier configuration. Each computer on your network must have its own unique IP address. Use NAT to convert your public IP address(es) to multiple private IP addresses for the computers on your network. If you have a server (mail or web server for example) on your network, you can use this feature to let people access it from the Internet. Use this feature to have the Device assign IP addresses, an IP default gateway and DNS servers to computers on your network. With Dynamic DNS (Domain Name System) support, you can use a fixed URL, www.zyxel.com for example, with a dynamic IP address. You must register for this service with a Dynamic DNS service provider. IP multicast is used to send traffic to a specific group of computers. The Device supports versions 1 and 2 of IGMP (Internet Group Management Protocol) used to join multicast groups (see RFC 2236). Get the current time and date from an external server when you turn on your Device. You can also set the time manually. These dates and times are then used in logs. Use logs for troubleshooting. You can send logs from the Device to an external syslog server. A UPnP-enabled device can dynamically join a network, obtain an IP address and convey its capabilities to other devices on the network. Your device has a stateful inspection firewall with DoS (Denial of Service) protection. By default, when the firewall is activated, all incoming traffic from the WAN to the LAN is blocked unless it is initiated from the LAN. The firewall supports TCP/UDP inspection, DoS detection and prevention, real time alerts, reports and logs. Your device can check the MAC addresses of clients against a list of allowed MAC addresses. 282 P-2812HNU(L)-Fx Series User's Guide