ZyXEL P-660HN-51 User Guide - Page 142
The Address Mapping Screen
View all ZyXEL P-660HN-51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Chapter 9 Network Address Translation (NAT) Table 43 Network > NAT > Port Forwarding: Edit (continued) LABEL DESCRIPTION Apply Click this to save your changes. Cancel Click this to restore your previously saved settings. 9.4 The Address Mapping Screen Note: The Address Mapping screen is available only when you select Full Feature in the NAT > General screen. Ordering your rules is important because the ZyXEL Device applies the rules in the order that you specify. When a rule matches the current packet, the ZyXEL Device takes the corresponding action and the remaining rules are ignored. If there are any empty rules before your new configured rule, your configured rule will be pushed up by that number of empty rules. For example, if you have already configured rules 1 to 6 in your current set and now you configure rule number 9. In the set summary screen, the new rule will be rule 7, not 9. Now if you delete rule 4, rules 5 to 7 will be pushed up by 1 rule, so old rules 5, 6 and 7 become new rules 4, 5 and 6. To change your ZyXEL Device's address mapping settings, click Network > NAT > Address Mapping to open the following screen. Figure 68 Network > NAT > Address Mapping 142 P-660HN-TxA User's Guide