ZyXEL P-660HN-51 User Guide - Page 153
The Firewall Screen
View all ZyXEL P-660HN-51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
Chapter 10 Firewall 10.2 The Firewall Screen Use this screen to enable firewall and/or SPI. Click Advanced Setup > Firewall to display the following screen. Figure 73 Advanced Setup > Firewall The following table describes the labels in this screen. Table 49 Advanced > Firewall LABEL DESCRIPTION Firewall Use this field to enable or disable firewall on your ZyXEL Device. SPI Use this field to enable or disable SPI on your ZyXEL Device. SAVE Click this to save your changes. CANCEL Click this to restore your previously saved settings. Enabling SPI blocks all traffic initiated from the WAN side, including the DMZ, virtual server and ACL on the WAN side. P-660HN-TxA User's Guide 153
Chapter 10 Firewall
P-660HN-TxA User’s Guide
153
10.2
The Firewall Screen
Use this screen to enable firewall and/or SPI. Click
Advanced Setup > Firewall
to display the following screen.
Figure 73
Advanced Setup > Firewall
The following table describes the labels in this screen.
Enabling SPI blocks all traffic initiated from the WAN side,
including the DMZ, virtual server and ACL on the WAN side.
Table 49
Advanced > Firewall
LABEL
DESCRIPTION
Firewall
Use this field to enable or disable firewall on your ZyXEL Device.
SPI
Use this field to enable or disable SPI on your ZyXEL Device.
SAVE
Click this to save your changes.
CANCEL
Click this to restore your previously saved settings.