ZyXEL P-660HN-51 User Guide - Page 175
The QoS Settings Summary Screen
View all ZyXEL P-660HN-51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
Chapter 14 Quality of Service (QoS) Table 58 Advanced Setup > QoS LABEL DESCRIPTION Type of Service Select a type of service from the drop-down list box. Available options are: Normal service, Minimize delay, Maximize throughput, Maximize reliability and Minimize monetary cost. DSCP Range Specify a DSCP number between 0 and 63 in this field. 802.1p Select a priority level (0 to 7) from the drop-down list box. Action IPP/DS Field Select IPP/TOS to specify an IP precedence range and type of services. IP Precedence Remarking Type of Service Remarking DSCP Remarking 802.1p Remarking Queue # ADD DELETE CANCEL Select DSCP to specify a DiffServ Code Point (DSCP) range. Enter a range from 0 to 7 to re-assign IP precedence to matched traffic. Zero is the lowest priority and seven is the highest. Select a type of service to re-assign the priority level to matched traffic. Available options are: Normal service, Minimize delay, Maximize throughput, Maximize reliability and Minimize monetary cost. Specify a DSCP number between 0 and 63 to re-assign the priority level to matched traffic. Select a priority level (0 to 7) to re-assign the priority level to matched traffic. Specify a Low, Medium, High or Highest queue tag to matched traffic. Traffic assigned to a higher queue gets through faster while traffic in lower queues is dropped when there is network congestion. Click this to add the rule. Click this to remove the rule. Click this to restore previously saved settings. 14.2.1 The QoS Settings Summary Screen Use this screen to display a summary of rules and actions configured for the ZyXEL Device. In the Advanced > QoS screen, click the QoS Settings Summary button to open the following screen. Figure 86 Advanced Setup > QoS > QoS Settings Summary P-660HN-TxA User's Guide 175