ZyXEL P-660HW-T1 v2 User Guide - Page 279
Wall-mounting Instructions
View all ZyXEL P-660HW-T1 v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 279 highlights
P-660HW-T v2 User's Guide APPENDIX D Wall-mounting Instructions Do the following to hang your ZyXEL Device on a wall. Note: See the product specifications appendix for the size of screws to use and how far apart to place them. 1 Locate a high position on wall that is free of obstructions. Use a sturdy wall. 2 Drill two holes for the screws. Make sure the distance between the centers of the holes matches what is listed in the product specifications appendix. Note: Be careful to avoid damaging pipes or cables located inside the wall when drilling holes for the screws. 3 Do not screw the screws all the way into the wall. Leave a small gap of about 0.5 cm between the heads of the screws and the wall. 4 Make sure the screws are snugly fastened to the wall. They need to hold the weight of the ZyXEL Device with the connection cables. 5 Align the holes on the back of the ZyXEL Device with the screws on the wall. Hang the ZyXEL Device on the screws. Figure 152 Wall-mounting Example Appendix D Wall-mounting Instructions 279