ZyXEL P-660HW-T1 v2 User Guide - Page 312
Function, Command, Description
View all ZyXEL P-660HW-T1 v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 312 highlights
P-660HW-T v2 User's Guide Table 144 Firewall Commands (continued) FUNCTION COMMAND DESCRIPTION Config edit firewall set tcp-idle-timeout This command sets how long ZyXEL Device lets an inactive TCP connection remain open before considering it closed. Rules Config edit firewall set log This command sets whether or not the ZyXEL Device creates logs for packets that match the firewall's default rule set. Config edit firewall set rule permit This command sets whether packets that match this rule are dropped or allowed through. Config edit firewall set rule active Config edit firewall set rule protocol This command sets the protocol specification number made in this rule for ICMP. Config edit firewall set rule log This command sets the ZyXEL Device to log traffic that matches the rule, doesn't match, both or neither. Config edit firewall set rule alert This command sets whether or not the ZyXEL Device sends an alert e-mail when a DOS attack or a violation of a particular rule occurs. config edit firewall set rule srcaddrsingle This command sets the rule to have the ZyXEL Device check for traffic with this individual source address. config edit firewall set rule srcaddrsubnet This command sets a rule to have the ZyXEL Device check for traffic from a particular subnet (defined by IP address and subnet mask). config edit firewall set rule srcaddr-range This command sets a rule to have the ZyXEL Device check for traffic from this range of addresses. 312 Appendix H Firewall Commands