ZyXEL P-660HW-T1 v2 User Guide - Page 46
Status Screen - password reset
View all ZyXEL P-660HW-T1 v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
P-660HW-T v2 User's Guide Table 3 Web Configurator Screens Summary (continued) LINK/ICON Remote MGMT SUB-LINK WWW Telnet FTP SNMP DNS UPnP Maintenance System Logs Tools Diagnostic ICMP General Time Setting View Log Log Settings Firmware Configuration Restart General DSL Line FUNCTION Use this screen to configure through which interface(s) and from which IP address(es) users can use HTTPS or HTTP to manage the ZyXEL Device. Use this screen to configure through which interface(s) and from which IP address(es) users can use Telnet to manage the ZyXEL Device. Use this screen to configure through which interface(s) and from which IP address(es) users can use FTP to access the ZyXEL Device. Use this screen to configure your ZyXEL Device's settings for Simple Network Management Protocol management. Use this screen to configure through which interface(s) and from which IP address(es) users can send DNS queries to the ZyXEL Device. Use this screen to change your anti-probing settings. Use this screen to enable UPnP on the ZyXEL Device. This screen contains administrative and system-related information and also allows you to change your password. Use this screen to change your ZyXEL Device's time and date. Use this screen to view the logs for the categories that you selected. Use this screen to change your ZyXEL Device's log settings. Use this screen to upload firmware to your ZyXEL Device. Use this screen to backup and restore the configuration or reset the factory defaults to your ZyXEL Device. This screen allows you to reboot the ZyXEL Device without turning the power off. These screens display information to help you identify problems with the ZyXEL Device general connection. These screens display information to help you identify problems with the DSL line. 2.4.2 Status Screen The following summarizes how to navigate the web configurator from the Status screen. Some fields or links are not available if you entered the user password in the login password screen (see Figure 4 on page 42). Not all fields are available on all models. 46 Chapter 2 Introducing the Web Configurator