ZyXEL WAH7130 User Guide

ZyXEL WAH7130 Manual

Get ZyXEL WAH7130 PDF manuals and user guides View all ZyXEL WAH7130 manuals
Add to My Manuals
Save this manual to your list of manuals

ZyXEL WAH7130 manual content summary:

  • ZyXEL WAH7130 | User Guide - Page 1
    WAH7130 LTE Portable Router Version 1.00 Edition 1, 03/2013 Quick Start Guide User's Guide Default Login Details LAN IP Address Password http://192.168.1.1 1234 www.zyxel.com Copyright © 2013 ZyXEL Communications Corporation
  • ZyXEL WAH7130 | User Guide - Page 2
    due to differences in your product firmware or your computer operating system. Every effort has been made to ensure that the information in this manual is accurate. Related Documentation • Quick Start Guide The Quick Start Guide shows how to connect the WAH7130 and access the Web Configurator. It
  • ZyXEL WAH7130 | User Guide - Page 3
    Contents Overview Contents Overview User's Guide ...9 Introduction ...11 Introducing the Web Configurator ...17 Technical Reference ...25 Monitor ...27 WAN ...33 Wireless LAN ...41 LAN ...49 DHCP Server ...51 NAT ...55 Firewall ...63 Maintenance ...69 Troubleshooting ...77 WAH7130 User's Guide 3
  • ZyXEL WAH7130 | User Guide - Page 4
    Contents Overview 4 WAH7130 User's Guide
  • ZyXEL WAH7130 | User Guide - Page 5
    Contents Overview ...3 Table of Contents ...5 Part I: User's Guide 9 Chapter 1 Introduction...11 1.1 Overview ...11 1.2 Ways to Manage the WAH7130 ...11 1.3 Good Habits for Managing the WAH7130 11 1.4 Hardware Installation ...12 1.5 Resetting the WAH7130 ...12 1.5.1 How to Use the RESET Button 12
  • ZyXEL WAH7130 | User Guide - Page 6
    28 3.5 Packet Statistics ...29 3.6 WLAN Station Status ...30 3.7 Short Message Service (SMS) ...31 Chapter 4 WAN ...33 4.1 Overview ...33 4.2 What 5 Wireless LAN...41 5.1 Overview ...41 5.1.1 What You Can Do ...42 5.1.2 What You Should Know ...42 5.2 General Wireless LAN 6 WAH7130 User's Guide
  • ZyXEL WAH7130 | User Guide - Page 7
    75 10.9 Language Screen ...75 Chapter 11 Troubleshooting...77 11.1 Overview ...77 11.2 Power, Hardware Connections, and LEDs 77 11.3 WAH7130 Access and Login ...78 11.4 Internet Access ...79 11.5 Wireless LAN Connections ...80 Appendix A Common Services ...83 Appendix B Pop-up Windows, JavaScript
  • ZyXEL WAH7130 | User Guide - Page 8
    Table of Contents 8 WAH7130 User's Guide
  • ZyXEL WAH7130 | User Guide - Page 9
    PART I User's Guide 9
  • ZyXEL WAH7130 | User Guide - Page 10
    10
  • ZyXEL WAH7130 | User Guide - Page 11
    a wireless router, which can connect to a mobile network and the Internet through a wireless WAN connection and provide easy network access to mobile users without additional wiring. You can set up a wireless network with other IEEE 802.11b/g/n compatible devices. WAH7130 A range of services such
  • ZyXEL WAH7130 | User Guide - Page 12
    1 Introduction • Change the system login password and wireless security key. Use a password that's not easy Guide for information on making hardware installation. You need to insert a SIM card, install the battery and charge the battery before you can use the WAH7130. 1.5 Resetting the WAH7130
  • ZyXEL WAH7130 | User Guide - Page 13
    wireless network with other WPS-enabled devices. 1.6.1 Turn on/off the WAH7130 To turn on the device, slide the power switch to the power icon and hold until the ZyXEL When the WAH7130 is in sleep mode, wireless clients will not be able to detect and connect to the WAH7130. To get the WAH7130 back to
  • ZyXEL WAH7130 | User Guide - Page 14
    1.6.4 Enable WPS Your WAH7130 supports WiFi Protected Setup (WPS), which is an easy way to set up a secure wireless network. WPS is wireless network with strong security, without having to configure security settings manually. Each WPS connection works between two devices. Both devices must support
  • ZyXEL WAH7130 | User Guide - Page 15
    or turning off. Firmware upgrade is in progress. The WAH7130 is turned off. 1.8 OLED Icons When the OLED display is turned on, you can check the icons display in the OLED screen to see the connection status, battery life and signal strength. Figure 2 WAH7130 OLED Display WAH7130 User's Guide 15
  • ZyXEL WAH7130 | User Guide - Page 16
    is available. Firmware upload is in progress. Firmware upload failed. There are new SMS text messages. The SMS box on the WAH7130 is full. The number of wireless clients which are currently connecting to the WAH7130. The WAH7130 is in the process of turning off. 16 WAH7130 User's Guide
  • ZyXEL WAH7130 | User Guide - Page 17
    by default). Refer to the Troubleshooting chapter (Chapter 11 on page 77) to see how to make sure these functions are allowed in Internet Explorer. 2.2 Accessing the Web Configurator 1 Wirelessly connect your computer to the WAH7130 (refer to the Quick Start Guide). 2 Launch your web browser. 3 Type
  • ZyXEL WAH7130 | User Guide - Page 18
    displays when the SIM card is inserted improperly or the PIN code is incorrect. displays when the WAH7130 has been registered and successfully connected to a currently available mobile network. displays when the WAH7130 is registered and successfully connected to another service provider's mobile
  • ZyXEL WAH7130 | User Guide - Page 19
    to change your APN, user name and/or password after logging into the Web Configurator. Note: This screen will not display when there is no SIM card installed in the WAH7130 or the mobile data connection is up. WAH7130 User's Guide 19
  • ZyXEL WAH7130 | User Guide - Page 20
    by your service (APN) provider. Contact your service provider for characters) given to you by your service provider. Type the password (of key to a SIM card. Without the PIN code, you cannot use the SIM card. Enter the PIN code incorrectly three times, the SIM card will be blocked by your ISP
  • ZyXEL WAH7130 | User Guide - Page 21
    icon to see the Monitor navigation menu. Click this icon to see the Configuration navigation menu. Click this icon to see the Maintenance navigation menu. WAH7130 User's Guide 21
  • ZyXEL WAH7130 | User Guide - Page 22
    Host Name Model Number Firmware Version Mobile Module Software Version wireless LAN MAC Address of your device. This displays the Service Provider Name (SPN). This shows the type of the mobile network (such as LTE, UMTS, GSM, HSPA+, etc.) to which the WAH7130 is connecting. This shows the WAH7130
  • ZyXEL WAH7130 | User Guide - Page 23
    Usage Cellular Data Usage DESCRIPTION This shows a descriptive name used to identify the WAH7130 in the wireless LAN. This shows the channel number which you select manually. This shows the level of wireless security the WAH7130 is using. This shows whether the firewall is enabled or not. This
  • ZyXEL WAH7130 | User Guide - Page 24
    statistics. WLAN Station Status Use this screen to view the wireless stations that are currently associated to the WAH7130. Short Message Service (SMS) Use this screen to view the SMS text messages the WAH7130 received from a mobile device. CONFIGURATION Network WAN Broadband This screen
  • ZyXEL WAH7130 | User Guide - Page 25
    PART II Technical Reference 25
  • ZyXEL WAH7130 | User Guide - Page 26
    26
  • ZyXEL WAH7130 | User Guide - Page 27
    • Use the WLAN Station Status screen to view the wireless stations that are currently associated to the WAH7130 (Section 3.6 on page 30). • Use the Short Message Service (SMS) screen to view and manage the text messages log screen. Click Clear Log to delete all the logs. WAH7130 User's Guide 27
  • ZyXEL WAH7130 | User Guide - Page 28
    , the WAH7130 provides the TCP/IP configuration for the clients. If DHCP service is disabled, you must have another DHCP server on that network, or else the computer must be manually configured. Click and IP Address) of all network clients using the WAH7130's DHCP server. 28 WAH7130 User's Guide
  • ZyXEL WAH7130 | User Guide - Page 29
    IP address for this specific MAC address. Click Apply to save your changes back to the WAH7130. Click Cancel to reload the previous configuration for this screen. 3.5 Packet Statistics Click Monitor > and is used for refreshing the screen. Figure 11 Packet Statistics WAH7130 User's Guide 29
  • ZyXEL WAH7130 | User Guide - Page 30
    WAH7130 is trying to bring the mobile data connection up, and displays Down when the 3G/4G WAH7130 in the Association List. Association means that a wireless client (for example, your network or computer with a wireless network card) has connected successfully to the AP (or wireless router
  • ZyXEL WAH7130 | User Guide - Page 31
    that the WAH7130 received from mobile devices or the service provider. When the SMS box is full the WAH7130 will begin to delete older entries as it adds new ones. Figure 13 Short Message Service (SMS) . Delete Click this to remove the message from the WAH7130 SMS box. WAH7130 User's Guide 31
  • ZyXEL WAH7130 | User Guide - Page 32
    Chapter 3 Monitor 32 WAH7130 User's Guide
  • ZyXEL WAH7130 | User Guide - Page 33
    PUK code when the SIM card is blocked (Section 4.6 on page 37). • Use the Change PIN screen to change the default PIN code (Section 4.4 on page 35). 4.3 What You Need To Know The information in this section can help you configure the screens for your 3G/4G LTE connection. WAH7130 User's Guide 33
  • ZyXEL WAH7130 | User Guide - Page 34
    3G. Both the WiMAX and Long Term Evolution (LTE) standards are the 4G candidate systems. 4G only supports all-IP-based packet-switched telephony services Communications), 3G) wireless The wireless connectivity 3G networks and allows for higher data transfer speeds. 4G/LTE Packetswitched The LTE
  • ZyXEL WAH7130 | User Guide - Page 35
    Table 14 Network > WAN > Broadband LABEL DESCRIPTION Mobile Access Information Mode This field is not configurable and shows No SIM card installed. if there is no SIM card inserted in the WAH7130. Select the type of the network (4G/LTE only, 3G/UMTS only, or 2G/EDGE only) to which you want the
  • ZyXEL WAH7130 | User Guide - Page 36
    > WAN > Broadband LABEL Authentication DESCRIPTION The WAH7130 supports PAP (Password Authentication Protocol) and CHAP (Challenge service provider for the correct authentication type. Type the user name (of up to 31 printable ASCII characters) given to you by your service WAH7130 User's Guide
  • ZyXEL WAH7130 | User Guide - Page 37
    To change your WAH7130's PIN settings, click Network > WAN > PIN Setting. The screen appears as shown if there is no SIM card inserted in the WAH7130. Figure 17 Network > WAN > PIN Setting (No SIM Card) The screen appears as shown if PIN code authentication is enabled. WAH7130 User's Guide 37
  • ZyXEL WAH7130 | User Guide - Page 38
    key to a SIM card. Without the PIN code, you cannot use the SIM card. PIN remaining you enter the PIN code incorrectly three times, the SIM card will be blocked by your ISP and you cannot your ISP for the inserted SIM card. Click Apply to save your changes back to the WAH7130. Click Cancel to begin
  • ZyXEL WAH7130 | User Guide - Page 39
    for the SIM card. You can specify any four to eight digits to have a new PIN code. Confirm New PIN Enter the new PIN code again for confirmation. Apply Click Apply to save your changes back to the WAH7130. Cancel Click Cancel to begin configuring this screen afresh. WAH7130 User's Guide 39
  • ZyXEL WAH7130 | User Guide - Page 40
    Chapter 4 WAN 40 WAH7130 User's Guide
  • ZyXEL WAH7130 | User Guide - Page 41
    The wireless network is the part in the blue circle. In this wireless network, devices A and B are called wireless clients. The wireless clients use the access point (AP) to interact with other devices (such as the printer) or with the Internet. Your WAH7130 is the AP. WAH7130 User's Guide 41
  • ZyXEL WAH7130 | User Guide - Page 42
    from connecting to the WAH7130 (Section 5.4 on page 46). 5.1.2 What You Should Know Every wireless network must follow these basic guidelines. • Every wireless client in the same wireless network must use the same SSID. The SSID is the name of the wireless network. It stands for Service Set IDentity
  • ZyXEL WAH7130 | User Guide - Page 43
    , you will lose your wireless connection when you press Apply to confirm. You must then change the wireless settings of your computer to match the WAH7130's new settings. Click Network > Wireless LAN to open the General screen. Figure 22 Network > Wireless LAN > General WAH7130 User's Guide 43
  • ZyXEL WAH7130 | User Guide - Page 44
    with the WAH7130. The transmission rate of your WAH7130 might be reduced. Select a number (from 1 to 10) to limit the number of wireless clients which can access your wireless network. A Basic Service Set (BSS) exists when all communications between wireless clients or between a wireless client and
  • ZyXEL WAH7130 | User Guide - Page 45
    . You can then assign varying security types to different SSIDs. Wireless clients can use different SSIDs to associate with the same access point. Click Network > Wireless LAN > Guest Wi-Fi. The following screen displays. Figure 24 Network > Wireless LAN > Guest Wi-Fi WAH7130 User's Guide 45
  • ZyXEL WAH7130 | User Guide - Page 46
    wireless network on the WAH7130. Otherwise, select Disable to turn it off. Enter a descriptive name for the guest wireless to the WAH7130. Click Cancel WAH7130 to give exclusive access to devices (Allow) or exclude devices from accessing the WAH7130 wireless client to be allowed access to the WAH7130
  • ZyXEL WAH7130 | User Guide - Page 47
    wireless client that are allowed access to the WAH7130. Delete Select an entry and click Apply to remove it from the summary table. Apply Click Apply to save your changes back to the WAH7130. Cancel Click Cancel to reload the previous configuration for this screen. WAH7130 User's Guide 47
  • ZyXEL WAH7130 | User Guide - Page 48
    Chapter 5 Wireless LAN 48 WAH7130 User's Guide
  • ZyXEL WAH7130 | User Guide - Page 49
    configure LAN settings. A Local Area Network (LAN) is a shared communication system to which many computers are attached. A LAN is a a management IP address. The WAH7130 has built-in DHCP server capability that assigns IP addresses to devices that support DHCP client capability. 6.2 What You
  • ZyXEL WAH7130 | User Guide - Page 50
    The subnet mask specifies the network number portion of an IP address. Your WAH7130 will automatically calculate the subnet mask based on the IP address that you the subnet mask computed by the WAH7130. Apply Click Apply to save your changes back to the WAH7130. Cancel Click Cancel to begin configuring
  • ZyXEL WAH7130 | User Guide - Page 51
    a server, the WAH7130 provides the TCP/IP configuration for the clients. If DHCP service is disabled, you must have another DHCP server on your LAN, or else the computer must be manually configured. 7.1.1 What . Click Network > DHCP Server. The following screen displays. WAH7130 User's Guide 51
  • ZyXEL WAH7130 | User Guide - Page 52
    DHCP server unless your ISP instructs you to do otherwise. IP Pool Starting Address Pool Size Apply Cancel Select Disable to stop the WAH7130 acting as a DHCP server. When configured as a server, the WAH7130 provides TCP/IP configuration for the clients. If not, DHCP service is disabled and you
  • ZyXEL WAH7130 | User Guide - Page 53
    :02. Select this if you want to reserve the IP address for this specific MAC address. Click Apply to save your changes back to the WAH7130. Click Cancel to reload the previous configuration for this screen
  • ZyXEL WAH7130 | User Guide - Page 54
    Chapter 7 DHCP Server 54 WAH7130 User's Guide
  • ZyXEL WAH7130 | User Guide - Page 55
    devices (A to C) connected to your WAH7130. The ISP assigns the WAN IP address use the IP address of the WAH7130, which is 192.168.1.1. Figure 29 discusses how to configure NAT on the WAH7130. 8.1.1 What You Can Do • Use WAH7130's port forwarding settings to forward incoming service requests to the server
  • ZyXEL WAH7130 | User Guide - Page 56
    where a host is located relative to the WAH7130, for example, the computers of your subscribers are of a host in a packet as the packet traverses a router, for example, the local address refers to the IP protection. With no servers defined, your WAH7130 filters out all incoming inquiries, thus
  • ZyXEL WAH7130 | User Guide - Page 57
    service; for example, web service is on port 80 and FTP on port 21. In some cases, such as for unknown services or where one server can support more than one service (for example both FTP and web service which the incoming services will be forwarded. To change your WAH7130's port forwarding settings
  • ZyXEL WAH7130 | User Guide - Page 58
    (s) and protocol will be displayed in the port forwarding summary table. Service Protocol Otherwise, select User define to manually enter the port number(s) and select the IP protocol. Select the transport layer protocol supported by this virtual server. Choices are TCP, UDP, or TCP_UDP. Server
  • ZyXEL WAH7130 | User Guide - Page 59
    in the first field next to Service Name. Otherwise, select a predefined service in the second field next to Service Name. The predefined service name and port number(s) will display in the Service Name and Port fields. Select the transport layer protocol supported by this virtual server. Choices are
  • ZyXEL WAH7130 | User Guide - Page 60
    identifies a service; for example, web service is on port 80 and FTP on port 21. In some cases, such as for unknown services or where one server can support more than one service (for example both FTP and web service), it 192.168.1.35 60 192.168.1.1 IP address assigned by ISP WAH7130 User's Guide
  • ZyXEL WAH7130 | User Guide - Page 61
    Blockingscreen to enable service blocking. You can enter/delete/modify the services you want to block and the date/time you want to block them (Section 9.3 on page 65). 9.1.2 What You Need To Know The following terms and concepts may help as you read through this chapter. WAH7130 User's Guide 63
  • ZyXEL WAH7130 | User Guide - Page 62
    this screen again. 9.3 Service Blocking Screen You can use this screen to enable service blocking, enter/delete/modify the services you want to block and the date/time you want to block them. Click Security > Firewall > Service Blocking. The screen appears as shown next. 64 WAH7130 User's Guide
  • ZyXEL WAH7130 | User Guide - Page 63
    address of the computer for which the firewall rule applies. This is the IP address of the computer to which traffic for the application or service is entering. This is the IP address of the computer from which traffic for the application or service is initialized. WAH7130 User's Guide 65
  • ZyXEL WAH7130 | User Guide - Page 64
    Chapter 9 Firewall Table 30 Security > Firewall > Service Blocking (continued) LABEL DESCRIPTION Protocol This is the protocol (TCP, UDP or ICMP) used Cancel to start configuring this screen again. See Appendix A on page 83 for commonly used services and port numbers. 66 WAH7130 User's Guide
  • ZyXEL WAH7130 | User Guide - Page 65
    70). • Use the Time screen to change your WAH7130's time and date (Section 10.5 on page 71). • Use the Firmware Upgrade screen to upload firmware to your WAH7130 (Section 10.6 on page 72). • Use the > General. The following screen displays. Figure 37 Maintenance > General WAH7130 User's Guide 69
  • ZyXEL WAH7130 | User Guide - Page 66
    want to give to the WAH7130. Administrator Inactivity Timer Type changes back to the WAH7130. Cancel Click Cancel to begin configuring this that you change your WAH7130's password. If you forget your WAH7130's password (or IP WAH7130. Cancel Click Cancel to begin configuring this screen afresh. 70
  • ZyXEL WAH7130 | User Guide - Page 67
    do not affect it. New Time (hh:mm:ss) This field displays the last updated time from the time server or the last time configured manually. When you select Manual, enter the new time in this field and then click Apply. WAH7130 User's Guide 71
  • ZyXEL WAH7130 | User Guide - Page 68
    manually. When you select Manual, enter the new date in this field and then click Apply. Select this radio button to have the WAH7130 get your changes back to the WAH7130. Click Cancel to begin configuring this screen afresh. 10.6 Firmware Upgrade Screen Find firmware at www.zyxel.com in a file
  • ZyXEL WAH7130 | User Guide - Page 69
    10 Maintenance Click Maintenance > Firmware Upgrade. Follow the instructions in this screen to upload firmware to your WAH7130. Figure 40 Maintenance > Firmware Upgrade The following table describes the labels in this screen. Table 34 Maintenance > Firmware Upgrade LABEL DESCRIPTION File Path
  • ZyXEL WAH7130 | User Guide - Page 70
    save the WAH7130's current configuration not turn off the WAH7130 while configuration file upload into the WAH7130 again. The WAH7130 automatically restarts the WAH7130 to its factory defaults of your WAH7130. Refer to WAH7130 IP address (192.168.1.1). 10.8 Restart Screen System restart allows
  • ZyXEL WAH7130 | User Guide - Page 71
    does not affect the WAH7130's configuration. 10.9 Language Screen Use this screen to change the language for the Web Configurator. Select the language you prefer and click Apply. The Web Configurator language changes after a while without restarting the WAH7130. Figure 43 WAH7130 User's Guide 75
  • ZyXEL WAH7130 | User Guide - Page 72
    Chapter 10 Maintenance 76 WAH7130 User's Guide
  • ZyXEL WAH7130 | User Guide - Page 73
    CHAPTER 11 Troubleshooting 11.1 Overview This chapter offers some suggestions to solve problems you might encounter. The potential problems are divided into the following categories. • Power, Hardware Connections, and LEDs • WAH7130 Access and Login • Internet Access • Wireless LAN Connections 11.2
  • ZyXEL WAH7130 | User Guide - Page 74
    on and the LED is behaving as expected. See the Quick Start Guide. 3 Make sure your computer is wirelessly connected to the WAH7130 and is in the same subnet as the WAH7130. See the troubleshooting suggestions for Wireless LAN Connections. 4 Make sure your Internet browser does not block pop-up
  • ZyXEL WAH7130 | User Guide - Page 75
    expected. See the Quick Start Guide. 2 Make sure your mobile service contract or contact your service provider directly. 5 Make sure your computer or wireless device is successfully connected to the WAH7130 via Wi-Fi. See the troubleshooting suggestions for Wireless LAN Connections. 6 If the problem
  • ZyXEL WAH7130 | User Guide - Page 76
    . 6 Make sure traffic from your computer is not blocked by the WAH7130's firewall service blocking. What factors may cause intermittent or unstabled wireless LAN connection? How can I solve this problem? The following factors may cause interference: • Obstacles: walls, ceilings, furniture, and
  • ZyXEL WAH7130 | User Guide - Page 77
    Troubleshooting • Building Materials: metal doors, aluminum studs. • Electrical devices: microwaves, monitors, electric motors, cordless phones, and other wireless devices. To optimize the speed and quality of your wireless LAN connection, you can: • Move your wireless device closer to the WAH7130
  • ZyXEL WAH7130 | User Guide - Page 78
    Chapter 11 Troubleshooting 82 WAH7130 User's Guide
  • ZyXEL WAH7130 | User Guide - Page 79
    from White Pines Software. DNS TCP/UDP 53 Domain Name Server, a service that matches web names (for example www.zyxel.com) to IP numbers. ESP User-Defined 50 (IPSEC_TUNNEL) The IPSEC web. HTTPS TCP 443 HTTPS is a secured http session often used in e- commerce. WAH7130 User's Guide 83
  • ZyXEL WAH7130 | User Guide - Page 80
    is the delivery mechanism for the USENET newsgroup service. PING User-Defined 1 Packet INternet Groper is a protocol that sends out ICMP echo requests to test whether or not a remote host is network servers. SSH TCP/UDP 22 Secure Shell Remote Login Program. 84 WAH7130 User's Guide
  • ZyXEL WAH7130 | User Guide - Page 81
    Table 36 Commonly Used Services (continued) NAME PROTOCOL PORT(S) DESCRIPTION STRM WORKS UDP 1558 Stream Works Protocol. SYSLOG UDP 514 Datagram Protocol) rather than TCP (Transmission Control Protocol). VDOLIVE TCP 7000 Another videoconferencing solution. WAH7130 User's Guide 85
  • ZyXEL WAH7130 | User Guide - Page 82
    Appendix A Common Services 86 WAH7130 User's Guide
  • ZyXEL WAH7130 | User Guide - Page 83
    up blocking to log into your device. Either disable pop-up blocking (enabled by default in Windows XP SP (Service Pack) 2) or allow pop-up blocking and create an exception for your device's IP address. Disable Pop-up disables any web pop-up blockers you may have enabled. WAH7130 User's Guide 87
  • ZyXEL WAH7130 | User Guide - Page 84
    following steps. 1 In Internet Explorer, select Tools, Internet Options and then the Privacy tab. 2 Select Settings... to open the Pop-up Blocker Settings screen. 88 WAH7130 User's Guide
  • ZyXEL WAH7130 | User Guide - Page 85
    ://". For example, http://192.168.167.1. 4 Click Add to move the IP address to the list of Allowed sites. Figure 48 Pop-up Blocker Settings WAH7130 User's Guide 89
  • ZyXEL WAH7130 | User Guide - Page 86
    Enable is selected (the default). 5 Under Scripting of Java applets make sure that Enable is selected (the default). 6 Click OK to close the window. 90 WAH7130 User's Guide
  • ZyXEL WAH7130 | User Guide - Page 87
    the Custom Level... button. 3 Scroll down to Microsoft VM. 4 Under Java permissions make sure that a safety level is selected. 5 Click OK to close the window. WAH7130 User's Guide 91
  • ZyXEL WAH7130 | User Guide - Page 88
    Advanced tab. 2 Make sure that Use Java 2 for under Java (Sun) is selected. 3 Click OK to close the window. Figure 52 Java (Sun) 92 WAH7130 User's Guide
  • ZyXEL WAH7130 | User Guide - Page 89
    : TOOLS > Options Click Content to show the screen below. Select the check boxes as shown in the following screen. Figure 54 Mozilla Firefox Content Security WAH7130 User's Guide 93
  • ZyXEL WAH7130 | User Guide - Page 90
    , click Tools, then Preferences. In the Advanced tab, select Content from the leftside menu. Select the check boxes as shown in the following screen. 94 WAH7130 User's Guide
  • ZyXEL WAH7130 | User Guide - Page 91
    Figure 56 Opera: Enabling Java Appendix B Pop-up Windows, JavaScript and Java Permissions To customize JavaScript behavior in the Opera browser, click JavaScript Options. Figure 57 Opera: JavaScript Options Select the items you want Opera's JavaScript to apply. WAH7130 User's Guide 95
  • ZyXEL WAH7130 | User Guide - Page 92
    Appendix B Pop-up Windows, JavaScript and Java Permissions 96 WAH7130 User's Guide
  • ZyXEL WAH7130 | User Guide - Page 93
    than required for successful communication. IC Radiation Exposure Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. WAH7130 User's Guide 97
  • ZyXEL WAH7130 | User Guide - Page 94
    purpose. ZyXEL shall in no event be held liable for indirect or consequential damages of any kind to the purchaser. To obtain the services of firmware package. You can download the latest firmware at www.zyxel.com. To obtain the source code covered under those Licenses, please contact support@zyxel
  • ZyXEL WAH7130 | User Guide - Page 95
    mmelser som framgår av direktiv 1999/5/EC ZyXEL 1999/5/ЕC. Hér með lýsir, ZyXEL því yfir að þessi búnaður Services and Telecommunications (BIPT) must be notified of any outdoor wireless link having a range exceeding 300 meters. Please check http://www.bipt.be for more details. WAH7130 User's Guide
  • ZyXEL WAH7130 | User Guide - Page 96
    des services Postaux et des Télécommunications ( Wireless LAN richiede una "Autorizzazione Generale". Consultare http://www.sviluppoeconomico.gov.it/ per maggiori dettagli. Latvia The outdoor usage of the 2.4 GHz band requires an authorization from the Electronic Communications WAH7130 User's Guide
  • ZyXEL WAH7130 | User Guide - Page 97
    Equipment. It means that used electrical and electronic products should not be mixed with general waste. Used electrical and electronic equipment should be treated separately. WAH7130 User's Guide 101
  • ZyXEL WAH7130 | User Guide - Page 98
    Appendix C Legal Information 102 WAH7130 User's Guide
  • ZyXEL WAH7130 | User Guide - Page 99
    Index Index Numbers 3G 34 4G 34 A Access Point Name 35 APN 35 C certifications 64 Firewall overview guidelines 64 network security Stateful inspection 64 ZyXEL device firewall 64 Firmware upload 72 file extension using HTTP G General wireless LAN screen 43 Guide Quick Start 2 I IP Address 49, 58 IP
  • ZyXEL WAH7130 | User Guide - Page 100
    49 Long Term Evolution 34 LTE 34 M MAC 46 Guide 2 R registration product 98 related documentation 2 Reset button 12 Reset the device 12 Restore configuration 74 roaming 35 O other documentation 2 S Service and port numbers 67 Service Set 44 Service Set IDentification 44 104 WAH7130 User's Guide
  • ZyXEL WAH7130 | User Guide - Page 101
    access 17 Overview 17 web configurator 11 Wireless association list 30 Wireless network basic guidelines 42 channel 42 encryption 43 example 41 MAC address filter 42 overview 41 security 42 SSID 42 Wireless security 42 WAH7130 User's Guide overview 42 type 42 wireless WAN 33 WLAN 33 WLAN button 14
  • ZyXEL WAH7130 | User Guide - Page 102
    Index 106 WAH7130 User's Guide
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
Quick Start Guide
www.zyxel.com
WAH7130
LTE Portable Router
Version 1.00
Edition 1, 03/2013
Copyright © 2013 ZyXEL Communications Corporation
User’s Guide
Default Login Details
LAN IP Address
Password
1234