eMachines D732 User Guide

eMachines D732 Manual

Get eMachines D732 PDF manuals and user guides View all eMachines D732 manuals
Add to My Manuals
Save this manual to your list of manuals

eMachines D732 manual content summary:

  • eMachines D732 | User Guide - Page 1
    Pack 1. Turn the computer over. Slide the battery lock in the direction shown. 2. Slide and hold the battery release latch to the release position (1), then lift out the battery pack from the main unit (2). 2 1 NOTE: The battery has been highlighted with a yellow oval as shown in the above image
  • eMachines D732 | User Guide - Page 2
    Removing the SD Dummy Card 1. See "Removing the Battery Pack" on page 53. 2. Push the SD dummy card all the way in to eject it. 3. Pull it out from the slot. 54 Chapter 3
  • eMachines D732 | User Guide - Page 3
    : The model displayed in this service guide may differ in color to the one in your package. 1. See "Removing the Battery Pack" on page 53. 2. Turn the computer over and fully open the lid. There are five (5) securing clips that must be released in order to remove the keyboard. 3. Release each clip
  • eMachines D732 | User Guide - Page 4
    5. Unlock the keyboard FPC and disconnect the cable as shown. Lift the keyboard clear of the chassis. 6. Unlock and disconnect the touchpad FPC from the mainboard: 56 Chapter 3
  • eMachines D732 | User Guide - Page 5
    Removing the ODD Module 1. See "Removing the Battery Pack" on page 53. 2. Remove the one (1) screw securing the ODD module in place. Step ODD Module Disassembly Size M2.5*6.5 Quantity 1 3. Grasp the ODD by the bezel and slide it out of the chassis. Screw Type Chapter 3 57
  • eMachines D732 | User Guide - Page 6
    4. Remove the ODD bezel by rotating the top edge downward. 5. Remove the two screws securing the ODD bracket. Step ODD Bracket Disassembly Size M2.0*3.0 6. Remove the bracket from the ODD. Quantity 2 Screw Type 58 Chapter 3
  • eMachines D732 | User Guide - Page 7
    Flowchart NOTE: Use the process highlighted in red to access the Bluetooth module Screw List Step Lower Cover Battery Bay WLAN Module Disassembly USB Module Disassembly HDD Module Screw M2.5*6.5 M2.0*3.0 M2.0*3.0 M2.5*4.0 M2-0.4*2 Quantity 17 6 1 1 1 Part No. 86.ARE07.001 86.ARE07.002
  • eMachines D732 | User Guide - Page 8
    the Lower Cover 1. See "External Modules Disassembly Process" on page 52. 2. Remove the twenty three (23) securing screws from the lower cover. Part No. 86.N1407.007 86.ARE07.001 86.R6Z07.001 86.R6Z07.001 Step Lower Cover (red callout) Battery Bay (green callout) Size M2.5*6.5 M2.0*3.0 Quantity
  • eMachines D732 | User Guide - Page 9
    3. Grasp the ODD bay with one hand while holding the lower cover with the other. Lift the lower cover from the device. Chapter 3 61
  • eMachines D732 | User Guide - Page 10
    Disassembly Overview 1. See "Removing the Lower Cover" on page 60. 2. This section is an overview of the major components of the main unit. 1 23 9 8 Item 1 2 3 4 5 Description RTC battery LVDS cable Thermal module WLAN module DIMM module(s) 76 5 4 Item 6 7 8 9 Description CPU Bluetooth
  • eMachines D732 | User Guide - Page 11
    Removing the DIMM Modules 1. See "Disassembly Overview" on page 62. 2. Push out the release latches on both sides of the DIMM socket to release the DIMM module. 3. Remove the DIMM module. 4. Repeat steps for the second DIMM module if present. Chapter 3 63
  • eMachines D732 | User Guide - Page 12
    Removing the WLAN Module 1. See "Disassembly Overview" on page 62. 2. Disconnect the two (2) cables from the WLAN board. 3. Remove the one (1) screw. Step WLAN Module Disassembly Size M2.0*3.0 Quantity 1 Screw Type 64 Chapter 3
  • eMachines D732 | User Guide - Page 13
    4. Detach and remove the WLAN board from the WLAN socket. Removing the USB Board 1. See "Disassembly Overview" on page 62. 2. Unlock and disconnect the USB FFC from the USB board. Repeat for the mainboard connector. Chapter 3 65
  • eMachines D732 | User Guide - Page 14
    3. Remove the one (1) screw from the USB board. Step USB Module Disassembly Size M2.5*4.0 Quantity 1 4. Lift the USB board upward and away from the chassis. Screw Type 66 Chapter 3
  • eMachines D732 | User Guide - Page 15
    the RTC Battery 1. See "Disassembly Overview" on page 62. 2. Disconnect the RTC battery cable from the mainboard. 3. Lift the RTC battery away from the mainboard. NOTE: The RTC battery has been highlighted with the yellow circle as shown in the previous image. Please detach the RTC battery and
  • eMachines D732 | User Guide - Page 16
    Removing the HDD Module 1. See "Disassembly Overview" on page 62. 2. Remove the one (1) screw securing the HDD module to the mainboard. Step HDD Module Size M2-0.4*2 Quantity 1 Screw Type 3. Using the
  • eMachines D732 | User Guide - Page 17
    4. Remove HDD from the bay. 5. Remove the four (4) screws from the carrier. Step HDD Carrier Disassembly Size M3.0*3.5 6. Remove the carrier from the HDD. Quantity 4 Screw Type Chapter 3 69
  • eMachines D732 | User Guide - Page 18
    Removing the LCD Module 1. See "Disassembly Overview" on page 62. 2. Remove the adhesive ground wire from the fan housing. 3. Remove the WLAN antennas from the cable guides. 4. Unlock and disconnect the LVDS cable. 70 Chapter 3
  • eMachines D732 | User Guide - Page 19
    5. Remove the four (4) screws from the left and right hinges. Step LCD Module Disassembly Size M2.5*6.5 Quantity 4 Screw Type 6. Tilt the upper cover upwards slightly (1) and separate it from the LCD module (2). 2 1 Chapter 3 71
  • eMachines D732 | User Guide - Page 20
    cable as shown. 3. Loosen the four (4) captive screws (in numerical order from 1 to 4) and remove the one (1) screw from the fan module. 4 1 3 Step Thermal Module Disassembly Size M2.5*4.0 (green callout) 2 Quantity 1 Screw Type 72 Chapter 3
  • eMachines D732 | User Guide - Page 21
    thermal module on a clean, dry surface when it is not installed. Removing the CPU 1. See "Removing the Thermal Module" on page 72. 2. Using a slotted screw driver, rotate the CPU locking screw 180° counter-clockwise as shown. Chapter 3 73
  • eMachines D732 | User Guide - Page 22
    3. Carefully lift the CPU clear of the socket. IMPORTANT:Place the CPU on a clean, dry surface when it is not installed. Removing the Mainboard 1. See "Removing the CPU" on page 73. 2. Remove the adhesive tape securing the speaker cable to the mainboard and disconnect the speaker cable from the
  • eMachines D732 | User Guide - Page 23
    3. Remove the one (1) securing screw from the mainboard. Step Mainboard Disassembly Size M2.5*4.0 4. Lift the mainboard away the lower cover. Quantity 1 Screw Type Chapter 3 75
  • eMachines D732 | User Guide - Page 24
    Removing the Bluetooth Module 1. See "Removing the Mainboard" on page 74. 2. Turn the mainboard over and locate the Bluetooth module. 3. Disconnect the Bluetooth cable from the mainboard. 76 Chapter 3
  • eMachines D732 | User Guide - Page 25
    4. Lift the Bluetooth module away from the mainboard. 5. Remove the mylar holder to expose the Bluetooth cable connector. Chapter 3 77
  • eMachines D732 | User Guide - Page 26
    6. Disconnect the Bluetooth cable from the Bluetooth module. NOTE: Circuit boards >10 cm² have been highlighted with a yellow rectangle as shown in the previous image. Please detach the Circuit board and follow local regulations for disposal. 78 Chapter 3
  • eMachines D732 | User Guide - Page 27
    LCD Module Disassembly Process LCD Module Disassembly Flowchart Screw List Step LCD Bezel Disassembly LCD Panel Disassembly LCD Hinge Disassembly Screw M2.5*5.0 M2.5*4.0 M2.0*3.0 Quantity 2 6 6 Part No. 86.T23V7.010 86.R6Z07.001 86.ARE07.002 Chapter 3 79
  • eMachines D732 | User Guide - Page 28
    Removing the LCD Bezel 1. See "Removing the LCD Module" on page 70. 2. Remove the two (2) bezel screws from the LCD module. Step LCD Bezel Disassembly Size M2.5*5.0 Quantity 2 Screw Type 3. Pry the bezel upwards at the top of the LCD module releasing it from the latches. 80 Chapter 3
  • eMachines D732 | User Guide - Page 29
    4. Continue separating the latches along the sides of the bezel towards the hinges. 5. Release the latches at the bottom of the LCD bezel. 6. Lift the bezel clear of the LCD module. Chapter 3 81
  • eMachines D732 | User Guide - Page 30
    Removing the Camera (CCD) Module 1. See "Removing the LCD Bezel" on page 80. 2. Lift the CCD module from the LCD cover. 3. Disconnect the cable as shown. NOTE: Take care not to damage the cable. 82 Chapter 3
  • eMachines D732 | User Guide - Page 31
    Removing the LCD Panel 1. See "Removing the LCD Bezel" on page 80. 2. Remove the six (6) securing screws from the LCD panel. Step LCD Panel Disassembly Size M2.5*4.0 Quantity 6 3. Remove the LVDS cable from the cable guides. Screw Type Chapter 3 83
  • eMachines D732 | User Guide - Page 32
    4. Lift the LCD panel clear of the LCD cover as shown. Remove the LCD Hinges 1. See "Removing the LCD Panel" on page 83. 2. Remove the six (6) screws, three on each side. Separate the hinges from the LCD panel. Step LCD Hinge Disassembly Size M2.0*3.0 Quantity 6 Screw Type 84 Chapter 3
  • eMachines D732 | User Guide - Page 33
    Removing the LVDS Cable 1. See "Removing the LCD Panel" on page 83. 2. Detach the CCD cable from the back of the LCD panel. 3. Remove the yellow tape securing the LVDS cable. 4. Starting from the top, remove the clear mylar covering and disconnect the LVDS cable from the LCD panel. Chapter 3 85
  • eMachines D732 | User Guide - Page 34
    Removing the WLAN Antennas 1. See "Removing the LCD Panel" on page 83. 2. Remove the black and white WLAN antennas from the cable guides. 3. Remove the black antenna cable from the LCD cover. Repeat for the white antenna. 86 Chapter 3
  • eMachines D732 | User Guide - Page 35
    LCD Module Assembly Process Replacing the WLAN Antennas 1. Place the black antenna cable onto the LCD cover as shown. Repeat for the white antenna. 2. Place the black and white WLAN antennas into the cable guides as shown. Chapter 3 87
  • eMachines D732 | User Guide - Page 36
    panel face does not get damaged. Connect the LVDS cable to the LCD panel. Place the clear mylar tape over the connector and press firmly. 2. Replace the yellow adhesive tape to secure the LVDS cable. 3. Adhere the CCD cable to the LCD panel. NOTE: Ensure that the cable is aligned correctly
  • eMachines D732 | User Guide - Page 37
    Replacing the LCD Hinges 1. See "Removing the LCD Panel" on page 83. 2. Replace the four (4) screws, 2 on each side to secure the hinges. Step LCD Hinge Assembly Size M2.0*3.0 Quantity 6 Screw Type Chapter 3 89
  • eMachines D732 | User Guide - Page 38
    Removing the LCD Panel 1. Place the LCD panel on the LCD cover as shown. 2. Place the LVDS cable into the cable guides. 90 Chapter 3
  • eMachines D732 | User Guide - Page 39
    3. Replace the six (6) securing screws to secure the LCD panel. Step LCD Panel Assembly Size M2.5*4.0 Quantity 6 Screw Type Chapter 3 91
  • eMachines D732 | User Guide - Page 40
    Replacing the Camera (CCD) Module 1. Connect the CCD cable as shown. NOTE: Take care not to damage the cable. 2. Place the CCD module onto the LCD cover. Apply gentle pressure to fix the adhesive. 92 Chapter 3
  • eMachines D732 | User Guide - Page 41
    Replacing the LCD Bezel 1. Place the bezel hinge covers over the hinges. 2. Ensure the LVDS and WLAN antenna cable bundle are exiting the left hinge as shown. 3. Apply pressure to snap the latches together. Chapter 3 93
  • eMachines D732 | User Guide - Page 42
    4. Apply pressure along the bottom of the bezel to attach the latches. 5. Apply pressure along the sides of the bezel to attach the latches. 6. Apply pressure along the top of the bezel to attach the latches. 94 Chapter 3
  • eMachines D732 | User Guide - Page 43
    7. Replace the two (2) bezel screws. Step LCD Bezel Assembly Size M2.5*5.0 Quantity 2 Screw Type Chapter 3 95
  • eMachines D732 | User Guide - Page 44
    Main Unit Assembly Process Replacing the Bluetooth Module 1. Connect the Bluetooth cable to the Bluetooth module. 2. Attach mylar holder to the Bluetooth cable connector. 96 Chapter 3
  • eMachines D732 | User Guide - Page 45
    3. Place the Bluetooth module onto the mainboard. 4. Connect the Bluetooth cable to the mainboard connector. Chapter 3 97
  • eMachines D732 | User Guide - Page 46
    Replacing the Mainboard 1. Place the mainboard onto the upper cover. 2. Replace the one (1) screw to secure the mainboard to the upper cover. Step Mainboard Assembly Size M2.5*4.0 Quantity 1 Screw Type 98 Chapter 3
  • eMachines D732 | User Guide - Page 47
    3. Secure the speaker cable to the mainboard using the adhesive tape connected to the cable. 4. Connect the speaker cable to the mainboard. Chapter 3 99
  • eMachines D732 | User Guide - Page 48
    Replacing the CPU IMPORTANT:The CPU has a Pin1 locator (1) that must be positioned corresponding to the marker (2) on the CPU socket. 1. Place the CPU into the CPU socket as shown, taking note of the Pin1 locator. 1 2 2. Using a slotted screw driver, rotate the CPU locking screw 180° clockwise as
  • eMachines D732 | User Guide - Page 49
    the Thermal Module IMPORTANT:Apply a suitable thermal grease and ensure all heat pads are in place before replacing the thermal module The following thermal materials are approved for use: • Thermal grease compound • Eapus PSX-D • Thermal pad • LairdTech T-F-7 1. Remove all traces of thermal
  • eMachines D732 | User Guide - Page 50
    5. Connect the fan cable as shown. 102 Chapter 3
  • eMachines D732 | User Guide - Page 51
    upper cover onto the LCD module and lower into place. Lower the hinges so they are flush with the hinge plates on the upper cover. 2. Replace the four (4) screws to secure the left and right hinges. Step LCD Module Assembly Size M2.5*6.5 Quantity 4 Screw Type Chapter 3 103
  • eMachines D732 | User Guide - Page 52
    3. Connect and lock the LVDS cable. 4. Place the WLAN antenna bundle into the cable guides around the fan module. 5. Place the adhesive ground wire attached to the WLAN antenna cable bundle onto the fan housing. 104 Chapter 3
  • eMachines D732 | User Guide - Page 53
    Replacing the HDD Module 1. Place the carrier onto the HDD. 2. Replace the four (4) screws to secure the HDD carrier. Step HDD Carrier Assembly Size M3.0*3.5 3. Place HDD in the HDD bay. Quantity 4 Screw Type Chapter 3 105
  • eMachines D732 | User Guide - Page 54
    4. Using the pull-tab, slide the HDD module in the direction of the arrow to connect the interface. 5. Replace the one (1) screw to secure the HDD module to the upper cover. Step HDD Module Assembly Size M2-0.4*2 Quantity 1 Screw Type 106 Chapter 3
  • eMachines D732 | User Guide - Page 55
    Replacing the RTC Battery 1. Place the RTC battery onto the mainboard. 2. Connect the RTC battery cable to the mainboard connector. Chapter 3 107
  • eMachines D732 | User Guide - Page 56
    Replacing the USB Board 1. Place the USB board onto the chassis. 2. Replace one (1) screw to secure the USB board. Step USB Board Assembly Size M2.5*4.0 Quantity 1 Screw Type 3. Connect and lock the USB FFC to the USB board. Repeat for the mainboard connector. 108 Chapter 3
  • eMachines D732 | User Guide - Page 57
    Replacing the WLAN Module 1. Insert the WLAN board into the WLAN socket. 2. Replace the one (1) screw. Step WLAN Board Assembly Size M2.0*3.0 Quantity 1 Screw Type Chapter 3 109
  • eMachines D732 | User Guide - Page 58
    3. Connect the two (2) antenna cables to the WLAN board as shown. NOTE: Cable placement is as follows: black (Main) to connector J1, white (AUX) to connector J2. 110 Chapter 3
  • eMachines D732 | User Guide - Page 59
    Replacing the DIMM Modules 1. Insert the DIMM module into the DIMM connector. 2. Press down to lock the DIMM module in place. 3. Repeat steps 1 and 2 for the second DIMM module if present. Chapter 3 111
  • eMachines D732 | User Guide - Page 60
    Replacing the Lower Cover 1. Place the lower cover onto the device. 2. Replace the twenty three (23) screws to secure the lower cover to the device. Step Lower Cover (red callout) Battery Bay (green callout) Size M2.5*6.5 M2.0*3.0 Quantity 17 6 Screw Type 112 Chapter 3
  • eMachines D732 | User Guide - Page 61
    External Module Assembly Process Replacing the ODD Module 1. Place the ODD bracket onto the ODD module and replace the two (2) screws to secure it. Step ODD Bracket Assembly Size M2.0*3.0 Quantity 2 Screw Type 2. Press the bezel into the tray, bottom edge first, to
  • eMachines D732 | User Guide - Page 62
    3. Push the ODD module into the ODD bay until it is flush with the casing. 4. Replace the one (1) screw to secure the module. Step ODD Module Assembly Size M2.5*6.5 Quantity 1 Screw Type 114 Chapter 3
  • eMachines D732 | User Guide - Page 63
    Replacing the Keyboard 1. Connect and lock the touchpad FFC to the mainboard connector. 2. Place the keyboard face down on the upper cover. Connect the keyboard FPC to the mainboard and secure the locking latch. 3. Turn the keyboard over and slide the front edge into the upper cover, ensuring that
  • eMachines D732 | User Guide - Page 64
    4. Press down as indicated to secure the keyboard in place. 116 Chapter 3
  • eMachines D732 | User Guide - Page 65
    SD dummy card 1. Insert the SD dummy card into the slot and push until the card clicks into place and is flush with the casing. Replacing the Battery Pack 1. Insert the battery pack and press down. 2. Slide the battery lock in the direction shown to secure the battery in place. Chapter 3 117
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
Chapter 3
53
Removing the Battery Pack
1.
Turn the computer over. Slide the battery lock in the direction shown.
2.
Slide and hold the battery release latch to the release position (1), then lift out the battery pack from the main
unit (2).
NOTE: The battery has been highlighted with a yellow oval as shown in the above image.
Please detach the battery and follow local regulations for disposal.
2
1