eMachines E19T6W 8512499 - eMachines Flat Panel Monitor User Guide - Page 15

www.emachines.com Setting up the optional speaker bar Power/Volume control Kensington lock slot Headphone jack Power indicator Microphone jack Headphone jack Bass port (for bass sound. Do not block.) Bass port (for bass sound. Do not block.) Installing the speaker bar To install the speaker bar: Tip (19-inch model) When using the optional speaker bar, we recommend that you use the included right-angle VGA cable for the video connection so the speaker bar does not obstruct the cable. In the United States, if you are using a DVI connection, you can order a right-angle DVI cable from www.gateway.com. 1 Tilt the screen back, then center the speaker bar below the screen. Make sure that the speakers face forward. 2 Tighten the two thumbscrews on the back of the speaker bar. 3 Connect the speaker bar's USB power cord to any available USB port on your computer. 4 Connect the speaker bar's headphone (green) and microphone (pink) cables to your computer's headphone and microphone jacks. 5 If your computer is not already on, turn it on. 11