eMachines T5226 User Guide - Page 47

Monitor

Page 47 highlights

The modem is not recognized by your computer • Make sure that the line connected to the modem is working and plugged into the appropriate port on your computer. See your setup poster to make sure that the connections have been made correctly. • If the modem shares the telephone line with another device, make sure that the telephone line is not in use (for example, someone is on the telephone, or another modem is in use). • Use the modem cable that came with your computer. Some telephone cables do not meet cable standards and may cause problems with the connection. • Shut down and restart your computer. • Run Windows modem diagnostics. Help For more information about modem troubleshooting, click Start, then click Help and Support. Type modem troubleshooting in the Search box, then press ENTER. The modem is noisy when it dials and connects When your modem tries to connect to another modem, it begins handshaking. Handshaking is a digital "getting acquainted" conversation between the two modems that establishes connection speeds and communication protocols. You may hear unusual handshaking sounds when the modems first connect. If the handshaking sounds are too loud, you can turn down the modem volume. Monitor The screen resolution is not correct • Change the screen resolution from the Display Settings dialog box. The computer is running but there is no picture • Make sure that the monitor is plugged in and turned on. If the monitor is turned on, the power LED should be lit. • Adjust the brightness and contrast controls to the center position. 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72

37
The modem is not recognized by your
computer
Make sure that the line connected to the
modem is working and plugged into the
appropriate port on your computer. See
your setup poster to make sure that the
connections have been made correctly.
If the modem shares the telephone line
with another device, make sure that the
telephone line is not in use (for example,
someone is on the telephone, or another
modem is in use).
Use the modem cable that came with
your computer. Some telephone cables
do not meet cable standards and may
cause problems with the connection.
Shut down and restart your computer.
Run Windows modem diagnostics.
The modem is noisy when it dials and connects
When your modem tries to connect to another
modem, it begins
handshaking
. Handshaking
is a digital “getting acquainted” conversation
between the two modems that establishes
connection speeds and communication
protocols. You may hear unusual handshaking
sounds when the modems first connect. If the
handshaking sounds are too loud, you can turn
down the modem volume.
Monitor
The screen resolution is not correct
Change the screen resolution from the
Display Settings
dialog box.
The computer is running but there is no picture
Make sure that the monitor is plugged in
and turned on. If the monitor is turned
on, the power LED should be lit.
Adjust the brightness and contrast
controls to the center position.
Help
For more information about modem troubleshooting,
click
Start
, then click
Help and Support
. Type
modem
troubleshooting
in the
Search
box, then press
E
NTER
.