iRobot Verro 300 Product Manual

iRobot Verro 300 Manual

Get iRobot Verro 300 PDF manuals and user guides View all iRobot Verro 300 manuals
Add to My Manuals
Save this manual to your list of manuals

iRobot Verro 300 manual content summary:

  • iRobot Verro 300 | Product Manual - Page 1
    iRobot® Verro™ OWNER'S MANUAL Model 00
  • iRobot Verro 300 | Product Manual - Page 2
    every time you remove the cleaner from the water. Do not plug the Power Supply in within 12 feet of the pool. Do not leave the cleaner in the pool all the time. Mishandling the unit can result in leakage of lubricants. Please keep the plug away from contact with water.  iRobot Verro Owner's Manual
  • iRobot Verro 300 | Product Manual - Page 3
    power cord to lift Verro from the pool. Use the handle. Do not force the floating power cord plug. It will fit into the socket only one way. Do not leave your cleaner in direct sunlight when not in use. Never leave the Power Supply in direct sunlight and avoid leaving it in the rain. www.irobot
  • iRobot Verro 300 | Product Manual - Page 4
    50 and 104 degrees Fahrenheit. The Power Supply is water resistant, but not waterproof and may be damaged by rain. Important: Failure to properly store Verro will result in loss of warranty. Tip iRobot recommends using the mesh filter bag (included) when the pool contains a significant quantity of
  • iRobot Verro 300 | Product Manual - Page 5
     Table of Contents Anatomy 6 - 7 Parts List 6 - 7 Using Verro 8 How Verro Works 11 Adjusting the Time Control Dial 12 Cleaning the Filter Bag 13 - 14 Maintenance and Adjustment 15 - 20 Troubleshooting 21 - 23 Customer Care 24 www.irobot.com 
  • iRobot Verro 300 | Product Manual - Page 6
    Square Foam Float 12. Filter Bag 13. Foam Float Clip 14. Bottom Lid Assembly 15. Jet Valve Port 16. Jet Valve Housing 17. Floating Power Cord 18. Fixed Axle Housing 19. 2" Wheel 20. Side Plate 21. Handle 22. Wheel Hubcap 23. Star Washer 24. Jet Nozzle 25. Locking Tab  iRobot Verro Owner's Manual
  • iRobot Verro 300 | Product Manual - Page 7
    16 15A 15 15. Jet Valve Port 15A. Jet Valve Port Screw 16. Jet Valve Housing Time Control Dial Rear View Front View 1. Fuse Holder 2. Power Supply cord 3. Power (ON/OFF) Switch 4. Time Control Dial 5. Socket (For Floating Power Cord) 6. Reset Button www.irobot.com 
  • iRobot Verro 300 | Product Manual - Page 8
    . Ensure the electric outlet has been properly grounded. Never leave the Power Supply plugged in when Verro is not in use Warning: A Ground Fault Current Interrupter (GFCI) must be installed to protect your electric outlet and prevent any possible electric shock.  iRobot Verro Owner's Manual
  • iRobot Verro 300 | Product Manual - Page 9
    the reset button. The light on the Power Supply will illuminate and Verro will start to clean your pool. 8 After approximately two hours, Verro will stop and the Power Supply light will turn off. To stop Verro before the end of the cleaning cycle, switch the Power Supply OFF. www.irobot.com 
  • iRobot Verro 300 | Product Manual - Page 10
    : Removing Verro by its floating power cord may cause severe damage to the cord requiring costly repairs. 13 Store Verro and its Power Supply in a dry area out of direct sunlight. The Power Supply is water resistant, but not waterproof, and may be damaged by rain. 10 iRobot Verro Owner's Manual
  • iRobot Verro 300 | Product Manual - Page 11
     How Verro Works iRobot Verro uses a powerful motor to draw 80 gallons of water per minute through the filter bag. This creates strong suction at two inlet ports under the robot that draws dirt and debris, such as bacteria, algae, leaves, and even coins into the filter bag where they are trapped.
  • iRobot Verro 300 | Product Manual - Page 12
    time. Once the time control dial has been set to your satisfaction, it will not need to be adjusted unless you use a different type of filter bag. If Verro starts to consistently not reach the waterline, or starts moving more slowly, try cleaning the filter bag. 12 iRobot Verro Owner's Manual
  • iRobot Verro 300 | Product Manual - Page 13
    both to clean and to move around, a clogged filter can significantly reduce Verro's effectiveness. The mesh filter bag is less susceptible to clogging from small particles, but it will also eventually become clogged by larger particles such as leaves, acorns, etc. 1 Turn the Power Supply OFF, unplug
  • iRobot Verro 300 | Product Manual - Page 14
    dry. 7 Turn the filter bag so that the felt surface is on the inside and the smooth, shiny surface is on the outside and place it back on the support bars. 8 Replace filter bag assembly in the robot. 9 Replace the bottom cover. Make sure the tabs click into place. 14 iRobot Verro Owner's Manual
  • iRobot Verro 300 | Product Manual - Page 15
    iRobot recommends that you rinse Verro with a garden hose after using it. This will extend the life of the plastic and keep your robot looking good for years to come. Storage Store Verro in a dry place out of direct sunlight at a temperature between 50 and 104 degrees Fahrenheit. The Power Supply
  • iRobot Verro 300 | Product Manual - Page 16
    away from contact with water.) Unplug the floating power cord from the Power Supply. 2 Place the robot so that you can walk away from it for 50 feet. 3 Holding the Detangler in your hand, walk away from Verro. The Detangler allows the floating power cord to rotate in the handgrip so that it
  • iRobot Verro 300 | Product Manual - Page 17
    the motor. If you notice that Verro is not cleaning well or that it is having difficulty moving around the pool, and other measures (cleaning the filter bag, checking the vacuum intakes, etc.) have not corrected the problem, check the impeller. 1 Unplug the Power Supply. (Please keep the plug away
  • iRobot Verro 300 | Product Manual - Page 18
     6 Using the bent paper clip, hook the material fouling the impeller. It may be helpful to use a small flashlight to see better. 7 Replace the jet valve port. 8 Replace the screws. 18 iRobot Verro Owner's Manual
  • iRobot Verro 300 | Product Manual - Page 19
    nozzles under the robot become blocked, Verro will not be able to clean as well. If Verro is not doing a good job of loosening attached dirt, and other measures (cleaning the filter, inspecting the vacuum intakes, etc.) have not worked, check the tubes. 1 Unplug the Power Supply. (Please keep the
  • iRobot Verro 300 | Product Manual - Page 20
    baffle, direct a high-pressure jet of water from a hose into the jet valve port. It may be helpful to remove the jet valve port (see Cleaning the impeller, above) in order to see the direction baffle. Check to make sure that it swings freely in both directions. 20 iRobot Verro Owner's Manual
  • iRobot Verro 300 | Product Manual - Page 21
    instead. Always turn off Verro's Power Supply and unplug it before troubleshooting any problem. Problem likely Cause What to Do Verro moves The filter bag needs to Clean the filter bag. (p. 13) slowly be cleaned Flaps in the vacuum intakes at bottom of robot are blocked Check the flaps in
  • iRobot Verro 300 | Product Manual - Page 22
    Troubleshooting (cont...) Problem Verro reverses direction before reaching end of pool Likely Cause The filter bag needs to be cleaned Time control dial is not set properly What to Do Clean the filter bag. (p. 13) Set the time control dial. (p. 12) Flaps in the vacuum intakes at bottom of robot
  • iRobot Verro 300 | Product Manual - Page 23
     Troubleshooting (cont...) Problem Verro is not removing attached dirt and debris Likely Cause The filter bag needs to be cleaned What to Do Clean the filter bag. (p. 13) Flaps in the vacuum intakes at bottom of robot are blocked Check the flaps in the vacuum intakes. (p. 20) The pump
  • iRobot Verro 300 | Product Manual - Page 24
    about accessories and other iRobot products. We would like to hear from you. Should you still need assistance, call our customer care representative at 877.855.8593 iRobot Customer Care Hours: • Monday - Friday 9AM - 7PM Eastern Time • Saturday 9AM - 6PM Eastern Time 24 iRobot Verro Owner's Manual
  • iRobot Verro 300 | Product Manual - Page 25
  • iRobot Verro 300 | Product Manual - Page 26
  • iRobot Verro 300 | Product Manual - Page 27
  • iRobot Verro 300 | Product Manual - Page 28
    Register your iRobot®Verro™ today. SAVE 1% on all accessories.* Verro Accessories: Mesh Filter Bag Fine Filter Bag To purchase accessories: Call 00..0 or visit our website at store.irobot.com *See registration card for details. Pricing and availability subject to change. Shipping and
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
iRobot
®
Verro
™
OWNER’S MANUAL
Model ±00