iRobot Verro 500 Product Manual

iRobot Verro 500 Manual

Get iRobot Verro 500 PDF manuals and user guides View all iRobot Verro 500 manuals
Add to My Manuals
Save this manual to your list of manuals

iRobot Verro 500 manual content summary:

  • iRobot Verro 500 | Product Manual - Page 1
    iRobot® Verro™ Owner's Manual Model 600
  • iRobot Verro 500 | Product Manual - Page 2
    cleaner from the pool. Shut off and unplug the Power Supply every time you remove the cleaner from the water. Do not leave the cleaner in the pool all the time. Mishandling the unit can result in leakage of lubricants. Please keep the plug away from contact with water.  iRobot Verro Owner's Manual
  • iRobot Verro 500 | Product Manual - Page 3
    in loss of warranty. Allow the cleaner to remain in the pool for 15 to 20 minutes following the end of its cleaning cycle. This will allow the motors to cool adequately. Do not use Verro in a pool warmer than 100 degrees Fahrenheit. Do not use the floating power cord to lift Verro from the pool. Use
  • iRobot Verro 500 | Product Manual - Page 4
    quantity of large debris (leaves, etc.), such as when the pool is opened for the season. The fine filter bag is ideal for filtering small debris (algae, sand, etc.) and for regular maintenance. Tip Periodically straighten the floating power cord with the Detangler.  iRobot Verro Owner's Manual
  • iRobot Verro 500 | Product Manual - Page 5
     Table of Contents Anatomy 6 Parts List 7 Using Verro 8 - 10 How Verro Works 11 Cleaning the Filter Bag 12 - 13 Maintenance and Adjustment 14 - 18 Troubleshooting 19 - 20 Customer Care 21 www.irobot.com 
  • iRobot Verro 500 | Product Manual - Page 6
     Anatomy 1 14 15 8 4 10 2 3 7 18 5 11 6 12 9 23 13  iRobot Verro Owner's Manual
  • iRobot Verro 500 | Product Manual - Page 7
    24 Parts List 1. Outlet Top 2. Pump Motor 3. Drive Motor 4. Handle Lock Mechanism 5. Pulley Assembly 6. Drive Belt 7. Drive Track 8. Body Assembly 9. Filter Screen 10. Side Plate 11. PVA Brush 12. Filter Bag 13. Bottom Lid Assembly 14. Handle Assembly 15. Cable Assembly 16. Power Supply (Transformer
  • iRobot Verro 500 | Product Manual - Page 8
    water. 3 Place Verro in the water and rock it from side to side to allow air to escape. Let Verro settle to the bottom of the pool. Ensure that it is right side up and level. 4 Place the Power Supply (transformer) at least 3.5 meters /12 feet from the pool. 3.5m/12ft  iRobot Verro Owner's Manual
  • iRobot Verro 500 | Product Manual - Page 9
    ) must be installed to protect your electric outlet and prevent any possible electric shock. 7 Press the green Power button to start Verro; the light on the Power Supply will illuminate and Verro will start. The length of the cleaning cycle will vary based on pool size. To stop Verro before the
  • iRobot Verro 500 | Product Manual - Page 10
     Using Verro (cont...) 8 When Verro has finished cleaning the pool it will stop automatically and the Power Supply light will go OFF. 9 Wait 20 minutes before removing Verro from the pool to allow the motors to cool. Shut off and unplug the Power Supply every time you remove the cleaner from the
  • iRobot Verro 500 | Product Manual - Page 11
     How Verro Works Verro has a powerful motor that pumps 80 gallons of water per minute through the robot, generating suction at two vacuum intakes under the robot. The water passes through a filter bag that traps dirt and debris down to two microns in size. (For comparison, the period at the end of
  • iRobot Verro 500 | Product Manual - Page 12
    of the water pumped through the filter bag to maintain traction on the pool floor bottom and walls. If the filter bag becomes clogged, Verro will not be able to clean as effectively and may have trouble moving along the bottom and up the walls properly. 1 Unplug the Power Supply. (Please keep the
  • iRobot Verro 500 | Product Manual - Page 13
    not machine dry. 7 Turn the filter bag so that the felt surface is on the inside and the smooth, shiny surface is on the outside and place it back on the support bars. Label 8 Replace filter bag assembly in the robot. 9 Replace the bottom cover. Make sure the tabs click into place. www.irobot.com 13
  • iRobot Verro 500 | Product Manual - Page 14
    the locking collar counter-clockwise to unlock it) from the Power Supply. 2 Place Verro upside down on a towel and remove the filter bag assembly. (p. 12) 3 Locate the side of the robot with the drive belts. Remove the four screws that hold on the corresponding plate. 14 iRobot Verro Owner's Manual
  • iRobot Verro 500 | Product Manual - Page 15
    . If the brushes are difficult to remove, soak them in water for 20 minutes. 8 Push the new brushes onto the wheel tubes. 9 Place the brushes back in robot, reinstalling the drive belts and drive tracks over the end hubs. 10 Replace the side plate. 11 Reattach the four screws. www.irobot.com 15
  • iRobot Verro 500 | Product Manual - Page 16
    . They will be happy to provide assistance. 1 Place Verro upside down on a towel and remove the filter bag assembly. (p. 12) 2 On each side of the robot, remove the four screws that hold on the side plate. Side Plate 3 Remove the side plates. 4 Remove the drive tracks. 16 iRobot Verro Owner's Manual
  • iRobot Verro 500 | Product Manual - Page 17
    , remove the drive belts. 6 Install the new drive belts and drive tracks. 7 Replace the side plates. 8 Reattach the four screws on each side. Untwisting the Floating Power Cord Check the floating power cord periodically for external damage. Verro is designed to travel around your pool in a way
  • iRobot Verro 500 | Product Manual - Page 18
    the Impeller Outlet Top Propeller 1 Unplug the floating power cord from the Power Supply. 2 Remove the screws that attach the outlet top to the robot. 3 Lift off the outlet top. 4 Clean any debris from the propeller and shaft. 5 Replace the outlet top and reinstall the screws. 18 iRobot Verro Owner
  • iRobot Verro 500 | Product Manual - Page 19
    The pump impeller is Clean the impeller. (p. 18) fouled Verro does not climb the walls of the pool The filter bag needs to be Clean the filter bag. (p. 12) cleaned The brushes,drive belts or drive tracks need replacing Replace brushes, drive belts or drive tracks. (p. 16) The floating power
  • iRobot Verro 500 | Product Manual - Page 20
     Troubleshooting (cont...) Problem Verro does not cover the entire pool Likely cause What to do The filter bag needs to be Clean the filter bag. (p. 12) cleaned The brushes, drive belts or drive tracks need replacing Replace drive belts and treads. (p. 16) The floating power cord Use the
  • iRobot Verro 500 | Product Manual - Page 21
    visit our web site at www.irobot.com for support tips, frequently asked questions or information about accessories and other iRobot products. We would like to hear from you. Should you still need assistance, call our customer care representative at 877.855.8593 iRobot Customer Care Hours: • Monday
  • iRobot Verro 500 | Product Manual - Page 22
    Register your iRobot®Verro™ today. SAVE 15% on all accessories.* Verro Accessories: Mesh Filter Bag Fine Filter Bag iRobot Verro Storage Caddy Visit our website to purchase accessories at: 800.727.9077 or visit store.irobot.com *See registration card for details. Pricing and availability subject to
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
iRobot
®
Verro
™
OWNER’S MANUAL
Model 600