1993 Buick LeSabre Owner's Manual - Page 137

With the radio on,press a tape into the slot marked AUTO REVERSE (tape side goes first). in Once the tapeis playing, use the upper and lower knobs for volume, balance, and fade just asyou did forradio. The arrow in the graphic display abovethe word TAPE indicates which side of the tape is being played. Your tape player has an auto reverse feature which automatically plays the other side of the tape after the first side hasplayed. FWD To advance the tape,press FWD and the tapewill rapidly go forward to the end of the tape or until you press the PROG or FWD button again. The radio will play during forward. PREV To hear a passage onthe tape that has just played, press PREV and thetape will back up and stop at the first 4-second quiet spot or when you press PROG or PREV again. PROG To go from one sideof the tape to the other, press the PROG button. The PROG button will also stop REV, FWD, PREV or NEXT and play the tape. NEXT To go directlyto the next selection on the tape, press NEXT. A 4-second quiet interval must be present for the tape to stop. Pressing PROG orNEXT again will play the tape. Cr02 This button sets the tapebias. When playing high bias chrome or metal tapes, press the button to turn the Cr02 on. Cr02 will appear in the display. When playing standard bias tapes, press again to turn the Cr02 off. EJECT To remove or stopthe tape and switch to radio, press the EJECT button. ST-PL To immediately switchfrom tape to radio, press the ST-PL button and the radio will resume playing the REV To reverse the tape,press REV and the tape will rapidly reverse to the beginning of the tape or until you press the PROG or REVbutton again. Theradio will play during reverse. 135