1993 Buick Skylark Owner's Manual - Page 76

4. If your engine still won't start (orstarts but then To start your V6 3.3 Liter (CodeN) engine: with too much gasoline. stops), it could be flooded 1. Don't pushthe accelerator pedal before starting your Try pushing your accelerator pedalall the way to the engine. In some other vehicles might needto do you it floor and holding there as you hold the key in this, but becauseof your vehicle's computer systems, "Start for about 15 seconds. This clears the extra you don't. to gasoline from the engine. Turn the ignition key to 2. Turn your ignition key "Start." When the engine " f . Wait 10 seconds, then repeat Step Of" 3. starts, let go of the key. Theidle speed will go down " warm. engine gets your as .4 3. If it doesn't start right away, push the accelerator pedal about one-quarter the way down while you of Do starts. turn the key to "Start." this until the engine As soon as it does, let go of the key and the accelerator pedal. seconds at a time will cause your battery to be drained much sooner. And the excessive heat can damage your starter motor. 75