1994 Buick Skylark Owner's Manual - Page 140

7. Rotate the TUNE knob right or to make the next le€t two numbers agree with your code. 8. Press the BAND AM-FM Knob and "000" will appear. Now youare ready to enter the second three digits of your code. 9. Repeat steps 6 and 7 to enter digits. 10.Press theAM-FM knob and"REP' will appear for 5 seconds and then"000" will appear. :11. Repeat steps 6 through 10. This time "SEC" should If the appear indicating that the radio is secure. display shows the verification steps were not successful and theentire sequence must be started again. ,' 3. Enter the six digits the code following steps thru of 6 9 as previously indicated. The display will show the number as entered. 4. Press the AM/FM button and the time appearsindicating that the disabling sequence was successful. If the display indicates "SEC", the number did not match and the unit is still secured. Disabling The Theft System 1. Press preset buttons 1 and 4 for 5 seconds with the ignition ON and radio power OFF. The display will show "SEC", indicating the unit is in the secure mode. "000". 2. Press the SET button. The display will show 3. Enter the first three digits of the code following steps 6 and 7 of the preceding directions. The display will show the numbers as entered. 4. Press the AM-FM button. The radio will display To Unlock The System After a Power Loss 'When battery power is reapplied to secured radio, the a radio won't turn on and "LOC" will appear in the display. Enter your secret code as follows; pause no more than I5 seconds between steps. 1. Turn the ignition ON. (Radio off.) 2. Press the SET button. The display will show "000". "000". of 5. Enter the second three digits the code. The display will show the numbers as entered. 6 . Press the AM-FM button. If the display shows - -", the disabling sequence was successful. (The numbers matched the user-selected code or the 6'-