1996 Buick Century Owner's Manual - Page 253

If a ring forms after spot cleaning, cleanthe entire area immediately or itwill set. Using Solvent-Type Cleaner on Fabric First, seeif you have to use solvent-type cleaner atall. Some spotsand stains will clean off better with just water and mild soap. If you need to use a solvent: Gently scrape excess soil from the trim material with a clean, dull knife or scraper. Use very little cleaner, light pressure and clean cloths (preferably cheesecloth). Cleaning should start at the outside of the stain, "feathering" toward the center. Keep changing to a clean sectionof the cloth. When you clean a stain from fabric, immediately dry the area with a blow dryer tohelp prevent a cleaning ring. Usin - lam-npe Cleanel- -In 1. h c u u m and brush the area to remove any loose dirt. 2. Always clean a whole trim panel or section. Mask surrounding trim along stitch or welt lines. 3. Mix Multi-Purpose Powdered Cleaner following the directionson the container label. 4. Use suds onlyand apply with a clean sponge. 5 . Don't saturate thematerial. 6. Don't rub it roughly. 7. As soon as you've cleaned the section, usea sponge to removethe suds. 8. Rinse the sectionwith a clean, wet sponge. 9. Wipe off what's left with a slightly damp paper towel or cloth. 10. Then dry it immediately with a blow dryer. 11. Wipe with a clean cloth.