1998 Buick LeSabre Owner's Manual - Page 285

Rear Turn Signals 1. Open the trunk. Turn the screw to the left of (counterclockwise) located just inside the trunk and remove. 2. Pull the carpet away from the rear area to access the turn signal bulb assembly. 3. Turn the bulb socket one-quarterturn to the left (counterclockwise), while pressing firmly. it 4. Pull the bulb socket straight out the assembly. of 5. Remove the old bulb by pulling it straight out. 6. Replace with a new bulb by pushing the bulb straight into the socket until the bulb clicks into place. 5 . Replace the bulb and reverse the steps to install the new bulb assembly. 7. Turn the bulb socket one-quarterturn into the assembly to lock it back into place. 8. Reverse Steps 1 through 3 to reinstall the bulb assembly. 6-35