1998 Buick LeSabre Owner's Manual - Page 70

Use the following procedure to changemodes: Delayed Locking(If Equipped) This feature lets the driver delay the actual loclung of the vehicle. When the power door lock switch is pressed with the key removed from the ignition, and the driver's door open, a chime will sound three times to signal that delayed locking is active. When all doors have been closed, the doors will lock automatically after five seconds. If any door is opened before this, the five-second timer will reset itself once all the doors have been closed again. Pressing the door lock switch twice within two seconds will override this feature. 1. Close all the doors and turn the ignition on. Keep all doors closed throughout this procedure. 2. Press and hold LOCK on the driver's power door lock switch through Step 4. 3. Press theLOCK button on the remote keyless entry transmitter. The automaticdoor locks will remain in the current mode. 4. Press the LOCK button on the transmitter again. Each time the transmitter's LOCK button is pressed, the mode will advance by one, going from 3 to 0 to 1, etc. Note: The door lockswill cycle according to the mode entered while customizing the memory door locks. (Mode "0" has no feedback.) 5 . Release the power door lockswitch. The automatic door lockswill remain in the most recent mode selected. Personal Choice Programming The delayed locking feature canbe turned on or off for each remote keyless entry transmitter. Vehicles are delivered with each transmitter defaulted with delayed locking off. To turn the feature on: 1. Press and hold LOCK on the driver's power door lock switch throughout this procedure. All the doors will lock. 2-6