1998 Buick Regal Owner's Manual - Page 303

Tail/Stop/Turn Signal Lamp 1. Remove the three plastic wing nuts (A). (Pliers may 4. Pull out the socket. 5. Pull the bulb out of the socket. (There are twobulbs on each taillamp.) 6. Push in a new bulb. be required to remove the wing nuts.) A A 7. Replace the socket into the housing and turn to the right. 8. Replace the taillamp housing to the body of the vehicle. 9. Install the wing nuts. B 10. Tighten the plastic nuts. 2. Pull the taillamp housing away from the body of the vehicle (B). 3. Squeeze the tab on the socket and turn the socket right to left. 6-39