1998 Buick Regal Owner's Manual - Page 305

Dome Lamp and 1. Grasp the front center rear center positions of the dome lamp housing squeeze together until and the housing releases from the base plate. A flat-bladed screwdriver may be necessary to pry the assembly loose. Windshield Wiper Blade Replacement 2. Lift the plastic locking tab on the electrical connector and pull the connector fromthe dome lamp assembly. 3. Grasp the bulb housing located in the center of the assembly and pull straight up. 4. Pull the bulb out the socket. of 5. Push in a new bulb. assembly. 6. Replace the socket into the dome lamp 7. Reconnect the dome lampassembly to the wiring harness, making sure the connector tab snaps into place. 8. Reposition the dome lamp assembly to the roof, and gently push the assembly into the base plate. 1. Turn on the wipers to the low wipe setting. For any bulb changing procedurenot listed in this section, contact your dealer service department. 6-41