1999 Buick Riviera Owner's Manual - Page 10

yellowblue Memory Seat and Mirrors Personal Choice Feature (Option) The remote keyless entry transmitters can also be programmed to move the driver's seat and outside mirrors to a set memory position when the transmitter's UNLOCK button is pressed. To program the system: 1. Adjust the driver's seat cushion to a comfortable position. Adjust both outside mirrors to suit you. See "Power Remote Control Mirror" in the Index. 2. Press the SET button on the driver's door armrest. You will hear one beep. 3. Within five seconds, press one of the two memory buttons on the armrest. You will hear two beeps to confirm that the mirror and the seat positions are entered into memory. 4. Press the UNLOCK button on the appropriate transmitter within five seconds. You will hear two beeps. The second transmitter can be programmed to record a different seat and mirror position by following the same steps. If you prefer to program the exit seat position, which moves the seat completely down and back, follow these steps: 1. Press the SET button on the driver's door armrest. You will hear one beep. 2. Press the EXIT button on the armrest. You will hear one beep, but the seat will not move at this time. 3. Press the UNLOCK button on the appropriate transmitter within five seconds. You will hear two beeps. This personal choice feature will work only when the vehicle is in PARK (P). A beep will sound inside the vehicle when the UNLOCK button on the transmitter is pressed to move the seat and mirrors. To turn this feature off, press SET and then UNLOCK within five seconds. 1-4