2003 Buick LeSabre Owner's Manual - Page 138

To turn the feature on, do the following: This feature can be programmed in the on or off mode for each transmitter. If your vehicle is equipped with the Driver Information Center (DIC), you must use it to program this feature. See Driver hiormation Center (DIC) on page 3-47. 1. Close all the doors and turn the ignition on. Keep all doors closed throughout this procedure. 2. Press and hold LOCK on the power door lock switch throughout this procedure. All the doors will lock. To turn the feature off, do the following: 1. Close all the doors and turn the ignition on. Keep all doors closed throughout this procedure. 3. Press the instant alarm on the transmitter. Perimeter lighting now remains off at this time and the horn will chirp one time. 4. Press the instant alarm on the transmitter again. Perimeter lighting is now enabled and the horn will chirp two times. 2. Press and hold LOCK on the power door lock switch throughout this procedure. Ali the doors will lock. 3. Press the instant alarm on the transmitter. Perimeter lighting remains on at this time and the horn will chirp two times. 5. Release the door lock switch. The perimeter lighting feature is now on. 4. Press the instant alarm on the transmitter again. Perimeter lighting is disabled and the horn will chirp one time. 5. Release the door lock switch. The perimeter lighting fed1It-e is now off. This procedure only changes the mode for the transmitter used to change this setting. 3-17