2003 Buick Park Avenue Owner's Manual - Page 193

6 RAND (Dolby@): Press this pushbutton to reduce background noise. The double-D symbol will appear on the display. Cassette Tape Messages E (Error): If this message and a number appears while trying to play a cassette tape, it could be for one of the following reasons: 0 Dolby@Noise Reduction is manufactured under a license from Dolby@ Laboratories Licensing Corporation. Dolby@and the double-D symbol are trademarks of Dolby@ LaboratoriesLicensing Corporation. AM-FM: Press this button to listen to the radio when a cassette tape is playing. SOURCE: Press this button to play a cassette tape or a CD when listening to the radio. TAPE SIDE and an arrow will appear on the display. If this button is pressed again, the system will go to disc play; CD PLAY will appear on the display. E10: The tape is tight and the player can't turn the tape hubs. Remove the tape. Hold the tape with the open end down and try to turn the right hub counterclockwise with a pencil. Turn the tape over and repeat. If the hubs do not turn easily, your tape may be damaged and should not be used in the player. Try a new tape to make sure your player is working properly. E l 1: The tape is broken. Try a new tape. A SEEK : Your tape must have at least three seconds of silence between each selection for seek to work. Press the up or the down arrow to go to the next or to the previous selection on the tape. EJECT: Press this button, located next to the cassette tape slot, to stop a tape when it is playing and to remove a tape when it is not playing. Eject may be activated with the radio off. v CLN (Clean): If this message appears on the display, the cassette tape player needs to be cleaned. It will still play tapes, but you should clean it as soon as possible to prevent damage to the tapes and player. See Care of Your Cassette Tape Player on page 3-78. If any error occurs repeatedly or if an error can't be corrected, contact your dealership. If your radio displays an error number, write it down and provide it to your dealership when reporting the problem. 3-68