2003 Buick Park Avenue Owner's Manual - Page 326

Removing the Wheel Covers and Wheel Nut Caps The following steps are necessary if you have the alloy (aluminum) wheel with a center cover that conceals the wheel nuts. After the wheel is put back on the vehicle, reinstall the cover. Apply pressure around the edge of the cover to snap it in place. Do not use a hammer or mallet to install the cover. Removing the Flat Tire and Installing the Spare Tire 1. Use the wheel wrench to loosen the wheel nuts, but don't remove them yet. The jack has a bolt at the end. Attach the wheel wrench to the bolt to create a jack handle. 1. Insert the flat end of the wheel wrench in the notch. 2. Pry off the center cover. Do not drop the cover or lay it face down, as it could be scratched or damaged. 5-77