2004 Buick LeSabre Owner's Manual - Page 270

2. Then keep turning the pressure cap, but now push down as you turn it. Remove the pressure cap. 3. Remove the 3800 Series II V6 engine cover shield to access the bleed valve. 3.1. Clean the area around the engine oil fill tube and cap before removing. Twist the oil fill tube, with cap attached, counterclockwise and remove it. 3.2. If you have the supercharged engine, remove the nut in the center of the cover shield. 3.3. Lift the engine cover shield at the front, slide the catch tab out of the engine bracket and remove the cover shield. 3.4. Put the oil fill tube, with cap attached, in the valve cover oil fill hole until you are ready to replace the cover shield. 5-32