2004 Buick Park Avenue Owner's Manual - Page 134

Perimeter Lighting When the unlock button on the remote keyless entry transmitter is pressed, the DRL, parking lamps and back-up lamps will come on if it is dark enough outside. This feature will only be activated when the security feedback feature is programmed to be in Modes 1, 3 or 5 on the transmitter. Modes 0, 2 and 4 do not respond with exterior lights flashing when unlocking the vehicle so perimeter lighting will not be active. This feature can be programmed on or off for each transmitter. To turn the feature off do the following: 1. Press and hold LOCK on the driver's door lock switch throughout this procedure. All doors will lock. 2. Press the remote alarm button on the transmitter to enter the programming mode. Perimeter lighting remains on at this time and the horn will chirp two times. 3. Press the remote alarm button on the transmitter again. Perimeter lighting is disabled and the horn will chirp one time. 4. Release the door lock switch. The perimeter lighting feature is now off. To turn the feature on do the following: 1. Press and hold LOCK on the driver's door lock switch throughout this procedure. All doors will lock. 2. Press the remote alarm button on the transmitter to enter the programming mode. Perimeter lighting remains off at this time and the horn will chirp one time. 3. Press the remote alarm button on the transmitter again. Perimeter lighting is now enabled and the horn will chirp two times. 4. Release the door lock switch. The perimeter lighting feature is now on. Perimeter lighting can also be activated through the DIC. See DIC Vehicle Personalization on page 3-51 or Driver Information Center (DIC) on page 3-47. 3-16