2004 Buick Regal Owner's Manual - Page 104

Turn and Lane-Change Signals To signal a turn, move the lever up or down. The lever returns to its original position when the turn is completed. An arrow on the instrument panel cluster will flash in the direction of the turn or lane change. Arrows that flash rapidly when signaling for a turn or lane change, or that fail to work, may indicate a burned-out signal bulb or fuse. Other drivers will not see the signal. See Front Turn Signal and Parking Lamps on page 5-56 and Taillamps, Turn Signal, and Stoplamps on page 5-58 for turn signal bulb replacement procedures. Also see Fuses and Circuit Breakers on page 5-98 for location of fuses. A chime will sound if the turn signal is left on for more than 3/4 mile (1.2 km). Headlamp High/Low-Beam Changer To signal a lane change, raise or lower the lever until the arrow starts to flash. Hold it there until the lane change is completed. The lever will return to its original position when released. To change the headlamps from low beams to high beams, or high to low, pull the multifunction lever until a click is heard. Then release it. This indicator will light on the instrument panel cluster when the high-beam lamps are on. 3-6