2006 Buick Lucerne Owner's Manual - Page 131

Turn Signal/Multifunction Lever Turn and Lane-Change Signals To signal a turn, move the lever on the left side of the steering wheel all the way up or down. The lever returns automatically when the turn is complete. An arrow on the instrument panel cluster will flash in the direction of the turn or lane change. The lever on the left side of the steering column includes the following: • G Turn and Lane-Change Signals. See Turn and Lane-Change Signals on page 3-7. You may also have an arrow in the outside mirror that flashes when the turn signal is used. See Outside Power Mirrors on page 2-36 for more information. Raise or lower the lever until the arrow starts to flash to signal a lane change. Hold it there until the lane change is complete. If you momentarily press and release the lever, the turn signal will flash three times. If the arrows flash very fast as you signal a turn or a lane change, a signal bulb may be burned out and other drivers will not see your turn signal. If a bulb is burned out, replace it to help avoid an accident. If the arrows do not go on at all when you signal a turn, check the fuse. See Fuses and Circuit Breakers on page 5-93. 3-7 • 3 Headlamp High/Low-Beam Changer. See • Headlamp High/Low-Beam Changer on page 3-8. Flash-To-Pass Feature. See Flash-to-Pass on page 3-8. page 3-8. • N Windshield Wipers. See Windshield Wipers on • L Windshield Washer. See Windshield Washer • on page 3-10. _ Heated Washer Fluid. See Windshield Washer on page 3-10.