2006 Buick Rendezvous Owner's Manual - Page 213

Your vehicle was originally programmed to LIGHTS. The mode may have been changed since then. To determine the current mode, or to change the mode, do the following: 1. Follow the instructions for "Entering Programming Mode" listed previously. 2. Follow the instructions for programming HEADLMP EXIT DELAY earlier in this section, to make sure which mode it is programmed to. 3. Press the MODE button until UNLOCK FEEDBACK appears on the DIC. 4. Press the SET button until the arrow is before LIGHTS or OFF. 5. Press the MODE button until you have determined which mode you prefer, to follow with the personalization. The mode you selected is now set. You can either exit programming mode by following the instructions later in this section or program the next feature available on your vehicle. Lock Feedback The lock feedback feature can be programmed to one of the following modes: OFF: When LOCK is pressed on the remote keyless entry transmitter, the headlamps and parking lamps will not flash and the horn will not sound. LIGHTS: When LOCK is pressed on the remote keyless entry transmitter, the headlamps and parking lamps will flash briefly. LIGHTS and HORN: When LOCK is pressed a second time on the remote keyless entry transmitter within five seconds, the headlamps and parking lamps will flash briefly and the horn will sound. Your vehicle was originally programmed to LIGHTS and HORN. The mode may have been changed since then. To determine the current mode, or to change the mode, do the following: 1. Follow the instructions for "Entering Programming Mode" listed previously. 2. Press the MODE button until LOCK FEEDBACK appears on the DIC. 3. Press the SET button until the arrow is before OFF, LIGHTS or LIGHTS and HORN. The mode you selected is now set. You can either exit programming mode by following the instructions later in this section or program the next feature available on your vehicle. 3-71