2006 Buick Rendezvous Owner's Manual - Page 69

Securing a Child Restraint Designed for the LATCH System {CAUTION: Each top tether anchor and lower anchor in the vehicle is designed to hold only one child restraint. Attaching more than one child restraint to a single anchor could cause the anchor or attachment to come loose or even break during a crash. A child or others could be injured if this happens. To help prevent injury to people and damage to your vehicle, attach only one child restraint per anchor. {CAUTION: If a LATCH-type child restraint is not attached to anchors, the restraint will not be able to protect the child correctly. In a crash, the child could be seriously injured or killed. Make sure that a LATCH-type child restraint is properly installed using the anchors, or use the vehicle's safety belts to secure the restraint, following the instructions that came with that restraint, and also the instructions in this manual. 1. Find the lower anchors, if equipped, for the desired seating position. 2. If the desired seating position does not have lower anchors or the child restraint does not have lower anchorages, see Securing a Child Restraint in a Rear Outside Seat Position on page 1-65, Securing a Child Restraint in the Center Rear Seat Position on page 1-67, and Securing a Child Restraint in the Right Front Seat Position on page 1-69 for instructions on installing the child restraint using the safety belts. 3. Put the child restraint on the seat. 1-63