2007 Buick Rendezvous Owner's Manual - Page 249

EXIT: The position recalled will be the previously programmed exit position. To determine the mode to which your vehicle is programmed or to program your vehicle to a different mode, do the following: 1. Follow the instructions for "Entering Programming Mode" listed previously. 2. Follow the instructions for programming SEAT RECALL to ON listed previously. 3. Press the MODE button until RECALL POSITION appears on the DIC. 4. Press the SET button until the arrow is before MEMORY or EXIT. The mode you selected is now set. You can either exit programming mode by following the instructions later in this section or program the next feature available on your vehicle. Tilt Mirror The tilt mirror feature can be programmed to one of the following modes: ON: The passenger's side outside rearview mirror will tilt down towards the curb when the vehicle is shifted to REVERSE (R) and returns to its previous position when the vehicle is shifted out of REVERSE (R). OFF: The mirror will not tilt. To determine the mode to which your vehicle is programmed or to program your vehicle to a different mode, do the following: 1. Follow the instructions for "Entering Programming Mode" listed previously. 2. Press the MODE button until TILT MIRROR appears on the DIC. 3. Press the SET button until the arrow is before ON or OFF. The mode you selected is now set. You can exit programming mode by following the instructions next in this section. 249