2007 Buick Rendezvous Owner's Manual - Page 445

For vehicles with aluminum wheels, remove the center cap by tapping the back of the cap with the folding wrench. 3. Remove the J-hook and the wing nut from the back of the jack access door. Assemble the wing nut and the J-hook. 4. Install the wing nut and the J-hook to the D-ring through the center hole of the tire. 5. Tighten the wing nut to secure the tire to the floor. Push and pull on the tire to make sure the tire is secure and does not move. 6. Put back all tools as they were stored in the jack storage compartment and put the compartment cover back on. Slip the tabs on the side of the compartment cover into the cover opening. Push the cover in place and push down the tabs on the cover so that it rests in the groove. This secures the cover in place. Storing the Flat Tire (Vehicles with a Rear Convenience Center) A. D-Ring E. Full-Size Tire B. Rear Convenience F. Cap on Bottom of Center Storage C. Wing Nut Compartment D. J-Hook 1. Open the center storage compartment door of the rear convenience center. 2. Remove the cap on the bottom of the storage compartment and flip the D-ring up. 445