2013 Buick Verano Owner Manual - Page 305

Vehicle Care When reinstalling the wheel cover or center cap on the full-size tire, tighten all five plastic caps hand snug with the aid of the wheel wrench and tighten them with the wheel wrench an additional one-quarter of a turn. Notice: Wheel covers will not fit on the vehicle's compact spare. If you try to put a wheel cover on the compact spare, the cover or the spare could be damaged. Storing the Flat Tire and Tools 1. Replace the wheel wrench and wheel blocks in the tool bag. 2. Remove the foam container from the rear storage compartment. 10-65 4. Place the jack and jack handle extension, if the vehicle has one, in the foam container. 5. Place the foam container inside the flat tire. Align the hole with the stow rod. 6. Place the tool bag tether over the stow rod and the tool bag rear of the flat tire. 7. Turn the retainer nut clockwise until tight. 8. Replace the load floor. The load floor may not lay flat. The compact spare is for temporary use only. Replace the compact spare tire with a full-size tire as soon as you can. Storing the Compact Spare Tire and Tools Reverse the instructions for removing the spare tire and tools to store the compact spare tire. Storing a Flat or Spare Tire and Tools { WARNING Storing a jack, a tire, or other equipment in the passenger compartment of the vehicle could cause injury. In a sudden stop or collision, loose equipment could strike someone. Store all these in the proper place. Coin/Pierce Jack Shown, Hex Head Jack Similar 3. Place the flat tire in the storage compartment with the valve stem down.