2014 Buick Enclave Owner Manual - Page 248

9-38 Driving and Operating Warning (Continued) The RVC display remains on after shifting out of R (Reverse) for approximately 10 seconds. Return to the previous screen sooner by performing one of the following: . actual distances. Do not back the vehicle using only the RVC screen, during longer, higher speed backing maneuvers, or where there could be cross traffic. Failure to use proper care before backing may result in injury, death, or vehicle damage. Always check behind and around the vehicle before backing. The rear vision camera system is designed to help the driver when backing up by displaying a view of the area behind the vehicle. When the driver shifts the vehicle into R (Reverse), the video image automatically appears on the infotainment screen. Once the driver shifts out of R (Reverse), the screen will go back to the last screen that had been displayed, after a delay. The RVC system may have a guideline overlay that can help the driver align the vehicle when backing into a parking spot. To turn the symbols and guidelines on or off: 1. Shift into P (Park). 2. Press Settings on the Home screen of the infotainment system. 3. Select Display Settings. 4. Select Rear Camera. The Rear Camera screen displays. 5. Select Symbols or Guidelines. When a checkmark appears next to the item, it is on. Rear Cross Traffic Alert (RCTA) On vehicles with RCTA, a red warning triangle with an arrow may also display on the RVC screen to warn of traffic coming from either direction, behind the vehicle. When an object is detected, three beeps sound on the left or right side, depending on the direction of the Press a hard key on the infotainment system. Shift into P (Park). Reach a vehicle speed of 8 km/h (5 mph). . . Symbols and Guidelines The RVC system may have a feature that lets the driver view caution symbols on the RVC screen while using the rear vision camera. The Ultrasonic Rear Parking Assist (URPA) system must not be disabled to use these symbols. See Ultrasonic Parking Assist on page 9-34. The caution symbols appear when an object has been detected by the URPA system. The symbol may cover the object when viewing the RVC screen.