1999 Cadillac Escalade Owner's Manual - Page 295

yellowblue 11. Install the two turn signal bulb sockets and the sidemarker bulb socket into the parking/turn signal bulb assembly. 12. Install the parking/turn signal assembly. Install and tighten the two screws. 2. Pull the parking/turn signal assembly toward the side of the vehicle until the tabs are out of the grille. Parking/Turn Signal Lamps A. Turn Signal Bulb B. Sidemarker Bulb 3. To remove a bulb, turn the socket counterclockwise to remove it from the assembly. 1. Remove the two screws on the side of the parking/turn signal bulb assembly. The parking/turn signal assembly must be removed to provide clearance for headlamp removal. 4. Install the parking/turn signal lamp assembly by sliding it from the side of the vehicle toward the center until the tabs fully engage the grille. 5. Install and tighten the two screws. 6-35