2004 Cadillac Seville Owner's Manual - Page 111

To stop recall movement of the memory feature at any time, press one of the power seat controls or memory buttons. Two personalized exit positions can be set by first recalling the driving positions by pressing 1 or 2 or the unlock button on the remote keyless entry transmitter 1 or 2, then positioning the steering wheel and seat in the desired exit positions. Then press and release the MEMORY SET button and, within five seconds, press the EXIT button. With the vehicle in PARK (P), the exit position for the previously set driver can be recalled by pressing the EXIT button. The mirrors and power lumbar will not be stored or recalled for the exit positions. If you use the remote keyless entry transmitter to enter your vehicle and the remote recall memory feature is on, automatic seat and mirror movement will occur. The numbers on the back of the transmitters, 1 and 2, correspond to the numbers on the buttons on the door panel. When the key is placed in the ignition in OFF and you have entered the vehicle without using the remote keyless entry transmitter and the key in recall memory feature is on, the seats, mirrors and steering wheel will automatically adjust to the programmed position of the last driver. Further programming for automatic seat and steering wheel movement can be done using the Driver Information Center (DIC). You can select or not select the following: • Automatic seat and mirror movement when the vehicle is unlocked with the remote keyless entry transmitter, or • automatic seat and mirror movement when a key is placed in the ignition. For programming information, see DIC Vehicle Personalization on page 3-63. 2-53