2004 Cadillac Seville Owner's Manual - Page 141

Do not cover the solar sensor located in the center of the instrument panel, near the windshield. For more information on the solar sensor, see "Sensors" later in this section. When your vehicle is first started, the display will show the driver's temperature setting, the fan speed and the air delivery mode. When the ENG/MET (English/metric) button on the Driver Information Center (DIC) is pressed, the display will show readings in Fahrenheit or Celsius. Use the ENG/MET button to toggle between them. + (Bi-Level): This mode directs approximately half of the air to the instrument panel outlets, and then directs most of the remaining air to the floor outlets. Some air may be directed toward the windshield. In automatic operation, cooler air is directed to the upper outlets and warmer air to the floor outlets. 8 (Floor): This mode directs most of the air to the floor outlets with some air directed to the outboard outlets (for the side windows) a little air directed to the windshield. The MODE switch can also be used to select the floor/defog mode. Information on defogging and defrosting can be found later in this section. Manual Operation SMODE T: Pressing the MODE switch and changing the mode cancels automatic operation and places the system in manual mode. Press AUTO to return to automatic operation. To change the current mode, select one of the following: y9z (Fan): Press this switch to increase or decrease the fan speed. Pressing this switch cancels automatic operation and places the system in manual mode. Press AUTO to return to automatic operation. If the airflow seems low when the fan speed is at the highest setting, the passenger compartment air filter may need to be replaced. For more information, see Passenger Compartment Air Filter on page 3-35 and Scheduled Maintenance on page 6-4. This mode directs air to the instrument panel outlets. G (Vent): 3-29