1996 GMC Jimmy Owner's Manual - Page 282

5 . Turn the bulb counterclockwise to remove it. 6. Put the new bulb into theheadlamp lens assembly and turn it clockwise until it is tight. I 1. Reach under the bumper and behind the turn signal lamp assembly. 7. Plug in the electrical connector. 8. Put the headlamp lens assembly back into the vehicle. Install and tighteu the screws. 2. Turn the socket counterclockwise and pull it out. 3: Holding the base of the bulb,pull the bulb straight out of the socket. Front Turn Signal Lamps If you have fog lamps, the fog lamp bracket must be removed before you can replacethe front turn signal lamps. 4. Push the new bulb into the socket unti it clicks. 5. Put the socket back into the turn signal lamp . assembly and turn it clockwiseuntil itllocks in place. ~ 1 6-35