1998 GMC Jimmy Owner's Manual - Page 305

he-Piece Front Turn Signal Lamp Assembly . Remove the headlamp assembly as shown under "One-Piece Composite Headlamp System" earlier in this section. 3. Pull the bulb straight out to remove it from the socket. 2. Twist the bulb socket to remove it from the headlamp assembly. 4. Push the new bulb into the socket until it snaps into place. 5. Put the bulb socket into the lamp assembly and twist it to the right until it is tight. 6. Put the headlamp assembly back into the vehicle. Install the two ret; ing clips. 6-36