1999 GMC Jimmy Owner's Manual - Page 11

yellowblue Memory Seat (If Equipped) If your vehicle has this feature, the control on the driver's seat looks like this. programming the memory button. You will hear a chime to confirm programming of the transmitter. When your vehicle is in PARK (P) for an automatic transmission or the parking brake is engaged for a manual transmission, push and release the numbered memory button you just stored. The seat will move to the set position. You will hear one chime. Pressing the UNLOCK button of a keyless entry transmitter will adjust the seat to the corresponding stored memory position. You will hear one chime. Repeat Steps 1 and 2 to readjust the seat. The transmitter need not be reprogrammed unless it needs to correspond to the other numbered memory button. You can use this memory function to save your seat cushion and seatback settings by using the following procedure: 1. Adjust the driver's seat to a safe and comfortable driving position. 2. Press the SET button and then one of the two numbered memory buttons. You will hear a chime for each button pushed to confirm that your settings have been placed in memory. 3. To program your keyless entry transmitter, press the UNLOCK button within five seconds of To set the seat for a second driver, follow the previous steps, but use the other numbered button and the other keyless entry transmitter. If there is a third driver, use the seat adjuster switch to adjust the seat. Pressing any of the seat adjuster switches, the SET button or pressing the desired memory button twice will cause the seat to stop moving. If you push the numbered button to adjust the seat and start the vehicle while the seat is still adjusting, adjustment will pause while the ignition is in START. Adjustment will resume after the ignition is in RUN. 1-5