2002 GMC Yukon Owner's Manual - Page 17

To fold, pull up on the strap loop at the rear of the seat cushion. Then, pull the seat cushion up an fold it forward. After folding the seat cushion fully forward, pull the seatback forward and fold the seatback down until it is flat. If the seatback cannot fold flat because it interferes with the cushion, try moving the seat forward and/or bring the front seatback more upright. On the passenger side of the Suburban/Yukon XL models, the lever at the base of the seat must be turned rearward to release the seatback. To create a load floor release the panels from the seatback by pushing forward on the latch. Then fold the panels back to cover the rear seat footwell area. To return the seat to the passenger position on a Suburban/Yukon XL do the following: 1. Lift the floor load panels and latch them into the seatback. 2. Lift the seatback up and push rearward all the way. 3. Lower the seat cushion until it latches into position. 4. Pull forward on the seatback and up on the seat cushion to make sure the seat is securely in place. 1-10