2004 GMC Canyon Owner's Manual - Page 91

Removing the Tailgate Follow these steps if you want to remove the tailgate: 1. Raise the tailgate slightly. To partially lower the tailgate do the following: 1. Raise the tailgate slightly. Tailgate Partially Down Tailgate Fully Down 2. Remove the retaining cables from both ends of the tailgate by pulling upward on the clip. Then, push forward so the larger part of the hole on the bracket is over the bolt. Pull the end over the bolt. 3. With the tailgate halfway down, pull the tailgate toward you at the passenger's side and then move the tailgate to the right to release the passenger's side. Reverse the procedure to reinstall the tailgate. Make sure it is secure. 2-11 2. Pull upward on each clip. Then, push forward so the larger part of the hole on the bracket is over the bolt. Pull the end over the bolt. 3. Slide the end fitting off the bottom bolt and onto the top bolt. If you would like to close the tailgate, the bracket cannot be in the partially open position and must be anchored on the bottom bolt, using the secondary position on the end fitting.