2008 GMC Sierra 1500 Pickup Owner's Manual - Page 130

2. Write down the eight to 12 switch settings from left to right as follows: • When a switch is in the up position, write "Left." • When a switch is in the down position, write "Right." • If a switch is set between the up and down position, write "Middle." The switch settings that you wrote down in Step 2 will now become the button strokes you enter into the Universal Home Remote in Step 4. Be sure to enter the switch settings that you wrote down in Step 2, in order from left to right, into the Universal Home Remote, when completing Step 4. 3. From inside your vehicle, first firmly press all three buttons at the same time for about three seconds. Release the buttons to put the Universal Home Remote into programming mode. 4. The indicator lights will blink slowly. Enter each switch setting from Step 2 into your vehicle's Universal Home Remote. You will have two and one-half minutes to complete Step 4. Now press one button on the Universal Home Remote for each switch setting as follows: • If you wrote "Left," press the left button in the vehicle. • If you wrote "Right," press the right button in the vehicle. • If you wrote "Middle," press the middle button in the vehicle. 2-54