2009 GMC Acadia Owner's Manual - Page 353

Service and Appearance Care When the vehicle has a flat tire (B), use the following example as a guide to assist you in the placement of wheel blocks (A). 5-67 Removing the Spare Tire and Tools The tools needed to remove the spare tire are located in the storage compartment on the driver side, at the rear of the vehicle. 1. Open the jack storage compartment by pulling on the latch tab, located toward the rear of the vehicle, and pulling the cover off. 2. Remove the wing bolt (B) by turning it counterclockwise 3. Push the jack (C) up out of the holding bracket. 4. Turn the jack on its side, with the bottom facing toward you. 5. Pull the jack straight out, bottom first. A. Wheel Block B. Flat Tire The following information explains how to use the jack and change a tire. A. Tool Bag B. Wing Bolt C. Jack The tools you will be using include the jack (A) and lug wrench (B).