2010 GMC Terrain Owner's Manual - Page 173

Infotainment System Power for auxiliary devices is not supplied by the radio system. To use the auxiliary inputs of the RSE system: 1. Connect the auxiliary device cables to the A/V jacks. 2. Power on both the auxiliary device and the RSE video screen. Changing the Source on the Video Display Screens The image from the auxiliary device can be switched between the video display screens. To change the display: 1. Press the AUX button on the remote control to change the source of both video screens from the DVD player to the auxiliary device. 2. Press the AUX button a second time to change the left video screen source to the DVD player and the right video screen to the auxiliary device. 3. Press the AUX button a third time to change the left video screen source to the auxiliary device and the right video screen to the DVD player. 4. Press the AUX button a fourth time to change the source of both video screens to the DVD player. How to Change the RSE Video Screen Settings The screen display mode, brightness, and language can be changed from the setup menu using the remote control. To change a setting: 1. Press 2. 6-35 Audio Output Audio from the DVD player or auxiliary inputs can be heard through the following: . . Wireless Headphones Vehicle Speakers The RSE system transmits the audio signal to the wireless headphones if an audio signal is available. See "Headphones" earlier in this section for more information. The front seat passengers are able to listen to playback from the A/V jacks through the vehicle speakers by selecting Rear A/V as the source on the radio. z. Use n , q , p , o and r to select the settings. 3. Press z again to exit the setup menu.