2010 GMC Terrain Owner's Manual - Page 30

2-4 Seats and Restraints Adjust the seatback by moving the control (C) forward or rearward. See Reclining Seatbacks on page 2‑5 for more information. Adjust the lumbar support by using the control (D). See Lumbar Adjustment on page 2‑5 for more information. A second seating and mirror position can be programmed by repeating the above steps and pressing button 2. To recall the memory positions, the vehicle must be in P (Park). Press and hold either button 1 or button 2 corresponding to the desired driving position. The seat, outside mirrors and pedals, if available move to the stored position. Releasing the button before the stored position is reached cancels the recall. Entry using the Remote Keyless Entry (RKE) transmitter with the remote recall feature on automatically adjusts the seat and mirrors. There is no adjustment when the position has not been changed by another seating position. When the remote recall feature is on, the seat and mirror position will be stored when the ignition is turned to LOCK/OFF. It is stored according to the RKE transmitter used to start the vehicle. Memory Seats Driver Seat with Power Seat Control, Power Lumbar, and Manual Recline shown D: Power Lumbar Adjustment E: Power Seat Adjustment F: Manual Recline Adjustment On vehicles with power seats, the controls are located on the outboard side of the seats. Adjust the power seat by moving the control (B) forward or rearward, up or down, or by pressing the top or bottom of control (E). The vehicle may have a memory seat allowing saved and recalled seat settings. Controls (A) are located on the outboard side of the seat. To save: 1. Adjust the driver seat, including the seatback recliner, and both outside mirrors, to a comfortable position. 2. Press and hold the MEM button and button 1 at the same time until a beep indicates the position is stored.